8-bit computing

8-bit microprocessors were the first widely used microprocessors in the computing industry, marking a major shift from mainframes and minicomputers to smaller, more affordable systems. The introduction of 8-bit processors in the 1970s enabled the production of personal computers, leading to the popularization of computing and setting the foundation for the modern computing landscape.

An 8-bit register can store 2⁸ different values. The range of integer values that can be stored in 8 bits depends on the integer representation used. With the two most common representations, the range is 0 through 255 (2⁸ − 1) for representation as an (unsigned) binary number, and −128 (−1 × 2⁷) through 127 (2⁷ − 1) for representation as two's complement.

8-bit CPUs use an 8-bit data bus and can therefore access 8 bits of data in a single machine instruction. The address bus is typically a double octet (16 bits) wide, due to practical and economical considerations. This implies a direct address space of 64 KB (65,536 bytes) on most 8-bit processors.

Most home computers from the 8-bit era fully exploited the address space, such as the BBC Micro (Model B) with 32 KB of RAM plus 32 KB of ROM. Others like the very popular Commodore 64 had full 64 KB RAM, plus 20 KB ROM, meaning with 16-bit addressing you could not use all of the RAM by default (e.g. from the included BASIC language interpreter in ROM);[2] without exploiting bank switching, which allows for breaking the 64 KB (RAM) limit in some systems. Other computers would have as low as 1 KB (plus 4 KB ROM), such as the Sinclair ZX80 (while the later very popular ZX Spectrum had more memory), or even only 128 bytes of RAM (plus storage from a ROM cartridge), as in an early game console Atari 2600 and thus 8-bit addressing would have been enough for the RAM, if it would not have needed to cover ROM too). The Commodore 128, and other 8-bit systems, meaning still with 16-bit addressing, could use more than 64 KB, i.e. 128 KB RAM, also the BBC Master with it expandable to 512 KB of RAM.

While in general 8-bit CPUs have 16-bit addressing, in some architectures you have both, such as in the MOS Technology 6502 CPU, where the zero page is used extensively, saving one byte in the instructions accessing that page, and also having 16-bit addressing instructions that take 2 bytes for the address plus 1 for the opcode. Commonly index registers are 8-bit (while other "8-bit" CPUs, such as Motorola 6800 had 16-bit index registers), such as the 6502 CPU, and then the size of the arrays addressed using indexed addressing instructions are at most 256 bytes, without needing longer code, i.e. meaning 8-bit addressing to each individual array.

The first commercial 8-bit processor was the Intel 8008 (1972) which was originally intended for the Datapoint 2200 intelligent terminal. Most competitors to Intel started off with such character oriented 8-bit microprocessors. Modernized variants of these 8-bit machines are still one of the most common types of processor in embedded systems.

Another notable 8-bit CPU is the MOS Technology 6502. It, and variants of it, were used in a number of personal computers, such as the Apple I and the Apple II series, the Atari 8-bit family, the BBC Micro, and the Commodore PET and VIC-20, and in a number of video game consoles, such as the Atari 2600 and the Nintendo Entertainment System.

8-bit processors continue to be designed today for general education about computer hardware, as well as for hobbyists' interests. One such CPU was designed and implemented using 7400-series integrated circuits on a breadboard.[4][5] Designing 8-bit CPU's and their respective assemblers is a common training exercise for engineering students, engineers, and hobbyists. FPGA's are used for this purpose.

• Kenbak-1