PowerQUICC

The Freescale XPC855T Service Processor of a Sun Fire V20z

The MPC8xx family was Motorola's first PowerPC based embedded processors, suited for network processors and system-on-a-chip devices. The core is an original implementation of the PowerPC specification. It is a single issue, four stage pipelined core with MMU and branch prediction unit with speeds up to 133 MHz. The MPC821 was introduced in 1995 together with MPC860 with a complete QUICC engine. A slimmed down version, MPC850 with reduced caches and IO ports came in 1997. The QUICC communication processor module (CPM) offloads networking tasks from the CPU, thus branding this family as PowerQUICC. All processors in the family differ in on-chip features like USB, serial, PCMCIA, ATM and Ethernet controllers and different amount of L1 caches ranging from 1 KiB up to 16 KiB.

MPC8xx – All PowerQUICC processors share this common naming scheme.

• MPC821 – The first embedded PowerPC processor, with integrated CPM, but no FPU and came in speeds up to 50 MHz
• MPC860 – The first PowerPC with fully integrated QUICC engine, with speeds up to 80 MHz
• MPC850 – A low-cost, stripped MPC860 with integrated USB and Ethernet. Speeds up to 50 MHz

MPC8245 in a Qlogic SANbox 5200 Fibre Channel switch

PowerQUICC II was introduced in 1998 and is the direct descendant of PowerPC 603e and the core also goes under the name 603e or G2. The processors still have 16/16 KiB instruction/data L1 caches, and are reaching frequencies up to 450 MHz. These communications processors are used in applications like VoIP systems, telecom switches, cellular base stations and DSLAMs. The PowerQUICC II family of processors are phased out in favour for the more powerful PowerQUICC II Pro line. There's no plans for further development of this core.

MPC82xx – All PowerQUICC II processors share this common naming scheme.

The PowerQUICC III processors are based on a 32-bit Power ISA v.2.03 core called e500, introduced in 2003. It has a dual issue, seven-stage pipeline with double precision FPUs, 32/32 KiB data and instruction L1 caches, multiple Gigabit Ethernet, PCI and PCIe, RapidIO, DDR/DDR2 memory controllers, and security accelerators. Speeds ranges from 533 MHz up to 1.5 GHz. These processors target enterprise level networking and telecom applications, high end storage, printing and imaging. Some of the processors use the older CPM module for the handling network processing offload, some use the newer QUICC Engine (same as in PowerQUICC II Pro), and some do not have a CPM or QUICC Engine at all. Freescale's marketing department nevertheless brand all devices in the 85xx series as being "PowerQUICC III".

MPC85xx – All PowerQUICC III processors share this common naming scheme. A trailing "E" signifies that the processors have a built-in encryption module.

• MPC8536/35/33(E) – Communications processor with e500v2 core.
• MPC8540 – The world's first RapidIO enabled host processor with e500v1 core. Includes dual Gigabit Ethernet controllers, ideal for routers. Speeds from 600 MHz to 1 GHz.
• MPC8541E – Similar to 8540 with e500v1 core, but without PCI-X, RapidIO and with security engine.
• MPC8548/47/45/43(E) – A family of integrated devices included PCI Express and RapidIO, along with a single e500v2 core. Each lower number has fewer abilities than its higher-numbered siblings.
• MPC8544E – Similar to the 8548 with e500v2 core, but produced in a cost-saving 90 nm process and with some differences in the actual feature set.
• MPC8555E – Similar to the 8560 with e500v1 core, but without PCI-X, RapidIO and with security engine.
• MPC8560 – Similar to the 8540 with e500v1 core, this was the first PQ III device launched. It includes a CPM along with the e500v1 core.
• MPC8568/68E/67/67E – Uses the QUICC Engine with e500v2 core instead of a CPM, the 8567 has a reduced set of peripheral units.
• MPC8569E – e500v2 core frequency of 1.33 GHz, 45 nm fabrication process, enhanced QUICC engine, rich set of peripherals and low power requirements.
• MPC8572E – Uses dual e500v2 cores with speed up to 1.5 GHz. Used in high end application-aware networking equipment like firewalls and antivirus devices (from Kaspersky Lab).

PowerQUICC will cease development in favor of the software-compatible QorIQ platform featuring all PowerPC e500 based processors, from single core, through multi-core, up to 32 cores. Freescale will keep manufacturing PowerQUICC processors in the foreseeable future for existing customers, but they will help facilitate the transition to QorIQ.

• PowerPC 603e/G2
• PowerPC e300
• PowerPC e500
• QorIQ

• "Freescale's Power Architecture portfolio". Archived from the original on March 7, 2012.
• "Freescale Power Architecture White paper - From Somerset to SoC" (PDF). Archived from the original (PDF) on March 22, 2013.
• Halfhill, Tom R. (21 March 2005). "Freescale Quickens PowerQUICC". Microprocessor Report.

• Freescale's PowerQUICC site