Nios II

Nios II is a 32-bit embedded processor architecture designed specifically for the Altera family of field-programmable gate array (FPGA) integrated circuits. Nios II incorporates many enhancements over the original Nios architecture, making it more suitable for a wider range of embedded computing applications, from digital signal processing (DSP) to system-control.

For other uses of "NIOS", see Nios (disambiguation).
Nios II
DesignerAltera
Bits32-bit
DesignRISC
EndiannessLittle-Endian
OpenNo
Registers
General-purpose32

Nios II is a successor to Altera's first configurable 16-bit embedded processor Nios, introduced in 2000.[1]

Key features

Like the original Nios, the Nios II architecture is a RISC soft-core architecture which is implemented entirely in the programmable logic and memory blocks of Altera FPGAs. Unlike its predecessor it is a full 32-bit design:

  • 32 general-purpose 32-bit registers,
  • Full 32-bit instruction set, data path, and address space,
  • Single-instruction 32 × 32 multiply and divide producing a 32-bit result.

The soft-core nature of the Nios II processor lets the system designer specify and generate a custom Nios II core, tailored for his or her specific application requirements. System designers can extend the Nios II's basic functionality by, for example, adding a predefined memory management unit, or defining custom instructions and custom peripherals.

Custom instructions

Similar to native Nios II instructions, user-defined instructions accept values from up to two 32-bit source registers and optionally write back a result to a 32-bit destination register. By using custom instructions, the system designers can fine-tune the system hardware to meet performance goals and also the designer can easily handle the instruction as a macro in C.

Custom peripherals

For performance-critical systems that spend most CPU cycles executing a specific section of code, a user-defined peripheral can potentially offload part or all of the execution of a software-algorithm to user-defined hardware logic, improving power-efficiency or application throughput.

Memory Management Unit

Introduced with Quartus 8.0, the optional MMU enables Nios II to run operating systems which require hardware-based paging and protection, such as the Linux kernel. Without an MMU, Nios is restricted to operating systems which use a simplified protection and virtual memory-model: e.g., µClinux and FreeRTOS.

Memory Protection Unit

Introduced with Quartus 8.0, the optional MPU provides memory protection similar to that provided by an MMU but with a simpler programming model and without the performance overhead associated with an MMU.

Nios II CPU family

Nios II classic is offered in 3 different configurations: Nios II/f (fast), Nios II/s (standard), and Nios II/e (economy). Nios II gen2 is offered in 2 different configurations: Nios II/f (fast), and Nios II/e (economy).

Nios II/f

The Nios II/f core is designed for maximum performance at the expense of core size. Features of Nios II/f include:

  • Separate instruction and data caches (512 B to 64 KB)
  • Optional MMU or MPU
  • Access to up to 2 GB of external address space
  • Optional tightly coupled memory for instructions and data
  • Six-stage pipeline to achieve maximum DMIPS/MHz
  • Single-cycle hardware multiply and barrel shifter
  • Optional hardware divide option
  • Dynamic branch prediction
  • Up to 256 custom instructions and unlimited hardware accelerators
  • JTAG debug module
  • Optional JTAG debug module enhancements, including hardware breakpoints, data triggers, and real-time trace

Nios II/s

Nios II/s core is designed to maintain a balance between performance and cost. This core implementation is not longer supported for Altera Quartus II v.17 and newer. Features of Nios II/s include:

  • Instruction cache
  • Up to 2 GB of external address space
  • Optional tightly coupled memory for instructions
  • Five-stage pipeline
  • Static branch prediction
  • Hardware multiply, divide, and shift options
  • Up to 256 custom instructions
  • JTAG debug module
  • Optional JTAG debug module enhancements, including hardware breakpoints, data triggers, and real-time trace

Nios II/e

The Nios II/e core is designed for smallest possible logic utilization of FPGAs. This is especially efficient for low-cost Cyclone II FPGA applications. Features of Nios II/e include:

  • Up to 2 GB of external address space
  • JTAG debug module
  • Complete systems in fewer than 700 LEs
  • Optional debug enhancements
  • Up to 256 custom instructions
  • Free, no license required

Avalon switch fabric interface

Nios II uses the Avalon switch fabric as the interface to its embedded peripherals. Compared to a traditional bus in a processor-based system, which lets only one bus master access the bus at a time, the Avalon switch fabric, using a slave-side arbitration scheme, lets multiple masters operate simultaneously.

Development processes

Development for Nios II consists of two separate steps: hardware generation and software creation.

Development is hosted inside an Altera application called the Embedded Design Suite (EDS). The EDS contains a complete integrated development environment to manage both hardware and software in two separate steps:

Hardware generation process

Nios II hardware designers use the Qsys system integration tool, a component of the Quartus-II package, to configure and generate a Nios system. The configuration graphical user interface (GUI) allows users to choose the Nios-II's feature-set, and to add peripheral and I/O-blocks (timers, memory-controllers, serial interface, etc.) to the embedded system. When the hardware specification is complete, Quartus-II performs the synthesis, place & route to implement the entire system on the selected FPGA target.
Qsys is replacing the older SOPC (System-on-a-Programmable-Chip) Builder, which could also be used to build a Nios II system, and is being recommended for new projects.[2]

Software creation process

A separate package, called the Embedded Design Suite (EDS), manages the software development. Based on the Eclipse IDE, the EDS includes a C/C++ compiler (based on the GNU toolchain), debugger, and an instruction-set simulator. EDS allows programmers to test their application in simulation, or download and run their compiled application on the actual FPGA host.

Because the C/C++ development-chain is based on GCC, the vast majority of open source software for Linux compiles and runs with minimal or no modification. Third-party operating-systems have also been ported to Nios II. These include Micrium MicroC/OS-II, eCos, Segger Microcontroller embOS, ChibiOS/RT, μCLinux and FreeRTOS.

Licensing

Nios II is comparable to MicroBlaze, a competing softcore CPU for the Xilinx family of FPGA. Unlike MicroBlaze, Nios II is licensable for standard-cell ASICs through a third-party IP provider, Synopsys Designware. Through the Designware license, designers can port Nios-based designs from an FPGA-platform to a mass production ASIC-device.

See also

References
  1. Altera. "Nios II Embedded Processor Backgrounder" (PDF).
  2. "5 Reasons to Switch from SOPC Builder to Qsys". Altera. Retrieved 16 March 2012.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.