ISO 6709

ISO 6709, Standard representation of geographic point location by coordinates, is the international standard for representation of latitude, longitude and altitude for geographic point locations.

Geodesy
Fundamentals
Concepts
Technologies
Standards (history)
NGVD 29 Sea Level Datum 1929
OSGB36 Ordnance Survey Great Britain 1936
SK-42 Systema Koordinat 1942 goda
ED50 European Datum 1950
SAD69 South American Datum 1969
GRS 80 Geodetic Reference System 1980
ISO 6709 Geographic point coord. 1983
NAD 83 North American Datum 1983
WGS 84 World Geodetic System 1984
NAVD 88 N. American Vertical Datum 1988
ETRS89 European Terrestrial Ref. Sys. 1989
GCJ-02 Chinese obfuscated datum 2002
Geo URI Internet link to a point 2010

The first edition (ISO 6709:1983) was developed by ISO/IEC JTC 1/SC 32. Later the standard was transferred to ISO/TC211, Geographic information/Geomatics in 2001. The committee completely revised the second edition (ISO 6709:2008). There was a short technical corrigendum (ISO 6709:2008/Cor 1:2009) released in 2009.[1] The third edition ISO 6709:2022 was published in 2022.[2]

The second edition consists of a main part and eight annexes (Annexes A through H). The main part and Annexes A and C give encoding-independent general rules to define items to specify geographic point(s). Annex D suggests a display style for human interface. Annexes F and G suggest styles of XML expression. Annex H suggests string expression, which supersedes the first edition of the standard.

General rules

Items

A geographical point is specified by the following four items:

  • First horizontal position coordinate (ϕ or y), such as latitude (negative number south of equator and positive north of equator)
  • Second horizontal coordinate (λ or x), such as longitude (negative values west of Prime Meridian and positive values east of Prime Meridian)
  • Vertical coordinate, i.e. height or depth (optional)
  • Identification of coordinate reference system (CRS) (optional)

The first three items are numerical values called coordinates. The CRS gives the relationship between the coordinates and a point on the earth. The identification of CRS could be a full description of properties defined in ISO 19111; only an identifier given by some registry (such as EPSG) is used in most cases, since only such identification is enough for most information exchange purposes.

Order, sign, and units

Order, positive direction, and units of coordinates are supposed to be defined by the CRS. When CRS identification is missing, the data must be interpreted by the following conventions:

  • Latitude comes before longitude
  • North latitude is positive
  • East longitude is positive
  • Fraction of degrees (decimal degrees) is preferred in digital data exchange, while sexagesimal notation is tolerated for compatibility

There is no such interpretation rule for vertical coordinates.

Representation at the human interface (Annex D)

When there is no guideline given from the user community, the following styles are suggested:

  1. Coordinate values (latitude, longitude, and altitude) should be delimited by spaces.
  2. The decimal point is a part of the value, thus must usually be configured by the operating system.[lower-alpha 1]
  3. Multiple locations should be represented by multiple lines.
  4. Latitude and longitude should be displayed by sexagesimal fractions (i.e. minutes and seconds).
  5. When minutes and seconds are less than ten, leading zeroes should be shown.
  6. Degree, minutes and seconds should be followed by the symbols ° (U+00B0), ′ (U+2032), and ″ (U+2033), without spaces between the number and symbol.
  7. North and south latitudes should be indicated by N and S following immediately after the digits.
  8. East and west longitudes should be indicated by E and W following immediately after the digits.
  9. Units of elevation or depth should be given by symbols, immediately after the digits.[lower-alpha 2]
  10. Elevation below zero-level reference or depth above reference level should be indicated by a minus sign − (U+2212).

Examples:

  • 50°40′46.461″N 95°48′26.533″W 123.45m
  • 50°03′46.461″S 125°48′26.533″E 978.90m

The standard does not specify how coordinates at the equator, prime meridian or antimeridian should be written.

XML representation (Annex F)

The XML representation based on the conceptual model of Annex C uses XML namespace http://www.isotc211.org/2006/gpl%5B%5D. However, there is no published XML schema at the time of writing (August 2011).

<gpl:GPL_CoordinateTuple xmlns:gpl="http://www.isotc211.org/gpl">
  <gpl:tuple srsName="urn:ogc:def:crs:EPSG:6.6:4326">
    35.89421911 139.94637467
  </gpl:tuple>
</gpl:GPL_CoordinateTuple>

String expression (Annex H)

A string expression of a point consists of latitude, longitude, height or depth, CRS identifier, and trailing solidus (/) without any delimiting character. When height or depth is used, there must be CRS identifier.[lower-alpha 3]

Latitude

Latitude is a number preceded by a sign character. A plus sign (+) denotes northern hemisphere or the equator, and a minus sign (-) denotes southern hemisphere.[lower-alpha 4]

The integer part of the number is a fixed length. The number of digits in that part indicates the units, thus leading zero(es) must be filled when necessary. The fractional part must have the appropriate number of digits to represent the required precision of the coordinate.

num. digitsunitsformatexample
2deg±DD.D+40.20361
4deg, min±DDMM.M+4012.22
6deg, min, sec±DDMMSS.S+401213.1

Longitude

Longitude is a number preceded by a sign character. A plus sign (+) denotes east longitude or the prime meridian, and a minus sign (-) denotes west longitude or 180° meridian (opposite of the prime meridian).[lower-alpha 5]

Rules about the number of digits are the same as for latitude.

num. digitsunitsformatexample
3deg±DDD.D-075.00417
5deg, min±DDDMM.M-07500.25
7deg, min, sec±DDDMMSS.S-0750015.1

Height or depth
Further information: Vertical position
  • When height or depth is present, CRS identifier must follow.
  • Positive direction and units are defined by CRS.[lower-alpha 6]
  • Negative number does not necessarily mean position below reference level.
  • Positive is up for height, down for depth.

CRS identifier
Further information: SRID

The CRS identifier begins with "CRS". There are three styles:

  1. When a registry provides online resolver, CRS<url>
  2. When a registry is offline, CRSregistry:crsid
  3. When the data creator provides full definition of CRS using ISO 19111, CRS<CRSID>

The example of original Annex H always use "CRSWGS_84".

Examples

See also

Notes
  1. Probably the intention is that the locale environment should not be overridden.
  2. This is different from SI style guides.
  3. Height without CRS identifier was allowed in the first edition, but not today. Ending with longitude is still allowed.
  4. Annex H allows letters N and S as sign characters, but gives no examples.
  5. Annex H allows letters E and W as sign characters, but gives no examples.
  6. This is different from the 1983 edition.

References
  1. "ISO 6709:2008/Cor 1:2009 -". ISO. Retrieved 8 June 2016.
  2. "ISO 6709:2022". www.iso.org. Retrieved 26 May 2023.

Standards

Implementations
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.