Stellar rotation

Gravity tends to contract celestial bodies into a perfect sphere, the shape where all the mass is as close to the center of gravity as possible. But a rotating star is not spherical in shape, it has an equatorial bulge.

As a rotating proto-stellar disk contracts to form a star its shape becomes more and more spherical, but the contraction doesn't proceed all the way to a perfect sphere. At the poles all of the gravity acts to increase the contraction, but at the equator the effective gravity is diminished by the centrifugal force. The final shape of the star after star formation is an equilibrium shape, in the sense that the effective gravity in the equatorial region (being diminished) cannot pull the star to a more spherical shape. The rotation also gives rise to gravity darkening at the equator, as described by the von Zeipel theorem.

An extreme example of an equatorial bulge is found on the star Regulus A (α Leonis A). The equator of this star has a measured rotational velocity of 317 ± 3 km/s. This corresponds to a rotation period of 15.9 hours, which is 86% of the velocity at which the star would break apart. The equatorial radius of this star is 32% larger than polar radius.[7] Other rapidly rotating stars include Alpha Arae, Pleione, Vega and Achernar.

The break-up velocity of a star is an expression that is used to describe the case where the centrifugal force at the equator is equal to the gravitational force. For a star to be stable the rotational velocity must be below this value.[8]

Surface differential rotation is observed on stars such as the Sun when the angular velocity varies with latitude. Typically the angular velocity decreases with increasing latitude. However the reverse has also been observed, such as on the star designated HD 31993.[9][10] The first such star, other than the Sun, to have its differential rotation mapped in detail is AB Doradus.[1] [11]

The underlying mechanism that causes differential rotation is turbulent convection inside a star. Convective motion carries energy toward the surface through the mass movement of plasma. This mass of plasma carries a portion of the angular velocity of the star. When turbulence occurs through shear and rotation, the angular momentum can become redistributed to different latitudes through meridional flow.[12][13]

The interfaces between regions with sharp differences in rotation are believed to be efficient sites for the dynamo processes that generate the stellar magnetic field. There is also a complex interaction between a star's rotation distribution and its magnetic field, with the conversion of magnetic energy into kinetic energy modifying the velocity distribution.[1]

Stars are believed to form as the result of a collapse of a low-temperature cloud of gas and dust. As the cloud collapses, conservation of angular momentum causes any small net rotation of the cloud to increase, forcing the material into a rotating disk. At the dense center of this disk a protostar forms, which gains heat from the gravitational energy of the collapse.

As the collapse continues, the rotation rate can increase to the point where the accreting protostar can break up due to centrifugal force at the equator. Thus the rotation rate must be braked during the first 100,000 years to avoid this scenario. One possible explanation for the braking is the interaction of the protostar's magnetic field with the stellar wind in magnetic braking. The expanding wind carries away the angular momentum and slows down the rotation rate of the collapsing protostar.[14][15]

Most main-sequence stars with a spectral class between O5 and F5 have been found to rotate rapidly.[7][17] For stars in this range, the measured rotation velocity increases with mass. This increase in rotation peaks among young, massive B-class stars. "As the expected life span of a star decreases with increasing mass, this can be explained as a decline in rotational velocity with age."

For main-sequence stars, the decline in rotation can be approximated by a mathematical relation:

${\displaystyle \Omega _{\mathrm {e} }\propto t^{-{\frac {1}{2}}},}$

where ${\displaystyle \Omega _{\mathrm {e} }}$ is the angular velocity at the equator and ${\displaystyle t}$ is the star's age.[18] This relation is named Skumanich's law after Andrew P. Skumanich who discovered it in 1972.[19][20] Gyrochronology is the determination of a star's age based on the rotation rate, calibrated using the Sun.[21]

Stars slowly lose mass by the emission of a stellar wind from the photosphere. The star's magnetic field exerts a torque on the ejected matter, resulting in a steady transfer of angular momentum away from the star. Stars with a rate of rotation greater than 15 km/s also exhibit more rapid mass loss, and consequently a faster rate of rotation decay. Thus as the rotation of a star is slowed because of braking, there is a decrease in rate of loss of angular momentum. Under these conditions, stars gradually approach, but never quite reach, a condition of zero rotation.[22]

Ultracool dwarfs and brown dwarfs experience faster rotation as they age, due to gravitational contraction. These objects also have magnetic fields similar to the coolest stars. However, the discovery of rapidly rotating brown dwarfs such as the T6 brown dwarf WISEPC J112254.73+255021.5[23] lends support to theoretical models that show that rotational braking by stellar winds is over 1000 times less effective at the end of the main sequence.[24]

A white dwarf is a star that consists of material that is the by-product of thermonuclear fusion during the earlier part of its life, but lacks the mass to burn those more massive elements. It is a compact body that is supported by a quantum mechanical effect known as electron degeneracy pressure that will not allow the star to collapse any further. Generally most white dwarfs have a low rate of rotation, most likely as the result of rotational braking or by shedding angular momentum when the progenitor star lost its outer envelope.[27] (See planetary nebula.)

A slow-rotating white dwarf star can not exceed the Chandrasekhar limit of 1.44 solar masses without collapsing to form a neutron star or exploding as a Type Ia supernova. Once the white dwarf reaches this mass, such as by accretion or collision, the gravitational force would exceed the pressure exerted by the electrons. If the white dwarf is rotating rapidly, however, the effective gravity is diminished in the equatorial region, thus allowing the white dwarf to exceed the Chandrasekhar limit. Such rapid rotation can occur, for example, as a result of mass accretion that results in a transfer of angular momentum.[28]

The neutron star (center) emits a beam of radiation from its magnetic poles. The beams are swept along a conic surface around the axis of rotation.

A neutron star is a highly dense remnant of a star that is primarily composed of neutrons—a particle that is found in most atomic nuclei and has no net electrical charge. The mass of a neutron star is in the range of 1.2 to 2.1 times the mass of the Sun. As a result of the collapse, a newly formed neutron star can have a very rapid rate of rotation; on the order of a hundred rotations per second.

Pulsars are rotating neutron stars that have a magnetic field. A narrow beam of electromagnetic radiation is emitted from the poles of rotating pulsars. If the beam sweeps past the direction of the Solar System then the pulsar will produce a periodic pulse that can be detected from the Earth. The energy radiated by the magnetic field gradually slows down the rotation rate, so that older pulsars can require as long as several seconds between each pulse.[29]

A black hole is an object with a gravitational field that is sufficiently powerful that it can prevent light from escaping. When they are formed from the collapse of a rotating mass, they retain all of the angular momentum that is not shed in the form of ejected gas. This rotation causes the space within an oblate spheroid-shaped volume, called the "ergosphere", to be dragged around with the black hole. Mass falling into this volume gains energy by this process and some portion of the mass can then be ejected without falling into the black hole. When the mass is ejected, the black hole loses angular momentum (the "Penrose process").[30] The rotation rate of a black hole has been measured as high as 98.7% of the speed of light.[31]