Rapahoe Branch

Rapahoe Branch route map
10.15 km
9.78 km
 Rapahoe
 Rewanui Branch
6.06 km
 Runanga
4.4 km
 Camp
0.83 km
 Grey River
 Midland Line
To Christchurch
0 km
 Greymouth

The Rapahoe Branch is a branch line railway that forms part of New Zealand's national rail network and is located on the West Coast of the South Island. It has been operational since 1923 and was named the Rapahoe Industrial Line until 2011.[1]

History

Construction

The line was built as a sub-branch of the now-closed Rewanui Branch, with the junction in Runanga. Approximately four kilometres in length, it was opened on 3 September 1923 to serve the Strongman Mine.[2] When the Rewanui Branch closed on 19 August 1985, the Rapahoe Branch gained the six kilometres from Greymouth to Runanga that was opened 1 December 1904.[3]

Upgrade
Rebuilt Cobden rail bridge in 2010 from Greymouth bank

The most recent significant upgrade on the line involved the replacement of Bridge No. 1 in 2006. The original 'S' shaped wooden structure, built by the Greymouth Point Elizabeth Coal Company in 1896, was considered to be structurally unsound.

The new bridge, using a concrete channel design with a ballasted deck, was built by contractors HEB Smithbridge Limited using designs drawn up by ONTRACK in consultation with their building contractors. The $15m project was funded largely by state coal miner Solid Energy and took 18 months to build. Located upstream from the original bridge, it is slightly longer than the original at 285 meters. Its southern end has also been reorientated away from Greymouth to a new junction at Omoto, a move designed to eliminate the need for trains to and from the branch to need to enter Greymouth to reposition the locomotives and the attendant road and rail disruption this caused.

The last northbound train to cross the old bridge was empty coal shunt X-1 on 28 May 2006. The following day, the track at the Cobden end of the old bridge was severed and a day later, the track at the Greymouth end was also cut. Over the next four days, work was carried out on switching the line over to the new bridge. The first revenue train over the new bridge was No. 834, a Christchurch-bound coal train, on 2 June 2006.

Despite being offered by ONTRACK to the Department of Conservation for preservation, the old bridge was demolished in July. The Department cited the unsound nature of the structure and noted that the funds that would be required to restore it would exceed its budget for the area. Two truss sections have been preserved. One is located on the southern bank of the Grey River.[4] The other is on the Cobden side of the river, in its original position.

Operation
Cobden Bridge with a coal train to Greymouth in 1987 with DJ3303.

In the era of steam locomotives, the line was typically worked by members of the A, B, and BA classes. In 1969, the line was dieselised and members of the DJ and DSC classes became the typical motive power.[3]

The line was slightly abbreviated in the first years of the 21st century. The mines served at the terminus had closed, so the Rapahoe terminus was moved to Rocky Creek, closer to its current source of business.[5]

The only traffic on the line is coal. It was originally exported via coastal shipping from Greymouth's wharf, but it is now exported via the deepwater port of Lyttelton, near Christchurch on the opposite coast of the South Island. Services were temporarily suspended during the second half of 2007 as the coal mine served ceased production while a programme of upgrades was undertaken. Trains operated twice daily between Rapahoe and Lyttelton[6] until early June 2007, when they were adjusted to run only when required.[7] Later that month, services were fully cancelled and the line was not in use by any regularly scheduled trains for approximately six months.[8] In mid-December, the resumption of services was announced as the coal mine resumed operation. The initial schedule provided for two trains each way, one in the early morning and one in the early afternoon. Each carries 1,500 tonnes of coal in 30 wagons and takes two hours to load.[9]

Present

Trains now operate very infrequently on the Rapahoe Branch. They only operate by demand between Christchurch and Rapahoe.

Stations

The only station on the line from Runanga is the terminus at Rapahoe.[10] The Rapahoe station was situated 3.72 km from the junction, with the end of rails at the 4.09 km peg.[2]

References

Citations
  1. "Rapahoe Branch". Land Information New Zealand. Retrieved 1 October 2014.
  2. John Yonge (editor), New Zealand Tramway and Railway Atlas, fourth edition (Essex: Quail Map Company, 1993), 22.
  3. Churchman & Hurst 2001, p. 197.
  4. "Railscene News". New Zealand Railfan. 12 (3): 17–18. June 2006.
  5. The Power Report, 29 March 2004, Rapahoe Depot to Close.
  6. New Zealand Train Timetable Guide, based on data from 6 October 2006 and 5 May 2007 updates.
  7. New Zealand Train Timetable Guide, based on data from the 7 June 2007 update.
  8. New Zealand Train Timetable Guide Archived 10 October 2007 at the Wayback Machine, effective 17 June 2007. Retrieved 4 November 2007.
  9. "Motorists Get Coal Train Caution", Greymouth Evening Star (11 December 2007). Retrieved 12 December 2007.
  10. Patrick Dunford, "Rapahoe Branch" Archived 29 September 2007 at the Wayback Machine. Retrieved 4 November 2007.

Bibliography
  • Churchman, Geoffrey B; Hurst, Tony (2001) [1990, 1991]. The Railways of New Zealand: A Journey through History (Second ed.). Transpress New Zealand. ISBN 0-908876-20-3.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.