Ostler Fault Zone

The Ostler Fault Zone (also Ostler Fault) is an active fault zone, to the east of the Alpine Fault in South Canterbury, South Island of New Zealand. It has had multiple recent rupture events greater than ML6.5 in magnitude, with a recent 6.9 to 7.0 event,[1] and has recently accommodated 1.9 mm (0.075 in)/year[2] of compression and thus land contraction.

Ostler Fault Zone
Ostler Fault
The northern Ostler Fault Zone is along the snow line at the right of this aerial view towards the south west. It is beyond milky blue Lake Pukaki, with beyond the fault, the snow covered Ben Ohau Range. The deeper blue lake in the distance is Lake Ōhau, well beyond the fault which passes at the top of the small Lake Ruataniwha in the center of the picture. The fault continues on the western side of the brown/gray Ahuriri River valley beyond at bottom left the partially snow covered Benmore Range and milky blue Lake Benmore.
EtymologyMount Ostler
CountryNew Zealand
RegionCanterbury Region
Characteristics
RangeMw7.0[1]
Segmentsmany
Length60 km (37 mi)[1]
Tectonics
PlateIndo-Australian
StatusActive
TypeReverse
AgeMiocene-Holocene
New Zealand geology database (includes faults)

Geography

East of the Southern Alps, are a number of relatively dry intermontane basins of which the most northern and largest is the Mackenzie Basin (Te Manahuna, the Mackenzie Country).[3] This has been extensively developed for hydroelectric purposes and contains the fault zone which as a result of the risk to power generation has been extensively studied. The fault zone extends from the Ahuriri River in the south to Whale Stream at the northern end of Lake Pukaki.[1] The northern part of the fault is on the eastern side of the Ben Ohau Range. The south western uplift from the fault continues in Table Hill to the south of the artificial Lake Ruataniwha, Cloud Hill and the Clay Cliffs of the west side of the Ahuriri River valley.

Geology

Tectonics

The boundary between the Australian and Pacific plates converges obliquely at about 38 mm (1.5 in)/year in this region[4] of the South Island of New Zealand. The right-lateral transpressional Alpine Fault along the western aspect of the South Island takes up no more than 80% of this movement.[4] In the central-southern part of the island the remaining compression element is taken up mainly by reverse faults such as those in the Otago fault system[5] and the Ostler Fault Zone.[1]

Geological context

In this region of South Canterbury the basement rock is graywacke. The fault zone was originally, more than 56 million years ago, a normal fault during the Late Cretaceous to Paleocene and was reactivated as a high angle thrust reverse fault in the last 2.4 million years.[3][6] The surface deformation patterns across the Ostler Fault Zone are up to about 3 km (1.9 mi) wide in the central portion[7] and usually have highly asymmetric anticlinal folding with broad west-tilted fold backlimbs abruptly transitioning to relatively steep and short fold forelimbs adjacent to the surface fault traces.[1] These surface manifestations are highly segmented and have been subdivided into three[7] or four[1] primary fault sections and multiple shorter strands due to discontinuities in the surface trace and changes in the overall fault strike. The faults are mainly North–South trending, west-dipping close to pure reverse dip-slip faults[3] that offset a thick sequence of Quaternary glacial outwash and late Neogene lake and stream sediments, up to 1 km thick,[4] from the Southern Alps in the Mackenzie Basin. At depths greater than 300 m (980 ft) the Ostler Fault is a single 45–55° westerly dipping structure,[4] consistent with observations that suggest that the entire Ostler fault has behaved as a kinematically linked array.[1] The fault has been partially characterised down to a depth of 1.5 km (0.93 mi).[3]

Activity

It is likely that there was a partial rupture that caused debris flow and perhaps up to a 1 m (3 ft 3 in) slip about 500 years ago, and surface rupture cracks are still present.[8] Larger surface-rupturing earthquakes occurred about 3000, 6000 and 10,000 years ago.[6][9] A 20 m (66 ft) vertical rupture occurred 18,000 years ago.[10] Contemporary risk is associated with the vertical slip rate of at least 1.1 mm (0.043 in)/year with a recurrence interval of 3000 years and the non trivial size of past events.[10]

References
  1. Amos, CB; Lapwood, JJ; Nobes, DC; Burbank, DW; Rieser, U; Wade, A (2011). "Palaeoseismic constraints on Holocene surface ruptures along the Ostler Fault, southern New Zealand". New Zealand Journal of Geology and Geophysics. 54 (4): 367–378. doi:10.1080/00288306.2011.601746. S2CID 31346318.
  2. Amos, Colin B.; Burbank, Douglas W.; Read, Stuart A. L. (2010). "Along-strike growth of the Ostler fault, New Zealand: Consequences for drainage deflection above active thrusts". Tectonics. 29 (4). Bibcode:2010Tecto..29.4021A. doi:10.1029/2009TC002613. S2CID 15665187.
  3. Ghisetti, Francesca C.; Gorman, Andrew R.; Sibson, Richard H. (2007). "Surface breakthrough of a basement fault by repeated seismic slip episodes: The Ostler Fault, South Island, New Zealand". Tectonics. 26 (6). Bibcode:2007Tecto..26.6004G. doi:10.1029/2007TC002146. S2CID 67783861.
  4. Campbell, Fiona M.; Ghisetti, Francesca; Kaiser, Anna E.; Green, Alan G.; Horstmeyer, Heinrich; Gorman, Andrew R. (2010). "Structure and evolution of the seismically active Ostler Fault Zone (New Zealand) based on interpretations of multiple high resolution seismic reflection profiles". Tectonophysics. 495 (3–4): 195–212. Bibcode:2010Tectp.495..195C. doi:10.1016/j.tecto.2010.09.016. ISSN 0040-1951.
  5. Griffin, Jonathan D.; Stirling, Mark W.; Wilcken, Klaus M.; Barrell, David J. A. (2022). "Late Quaternary Slip Rates for the Hyde and Dunstan Faults, Southern New Zealand: Implications for Strain Migration in a Slowly Deforming Continental Plate Margin". Tectonics. 41 (9). Bibcode:2022Tecto..4107250G. doi:10.1029/2022TC007250. S2CID 252154761.
  6. McClymont, Alastair F.; Green, Alan G.; Villamor, Pilar; Horstmeyer, Heinrich; Grass, Christof; Nobes, David C. (2008). "Characterization of the shallow structures of active fault zones using 3-D ground-penetrating radar data". Solid Earth. 113 (B10). Bibcode:2008JGRB..11310315M. doi:10.1029/2007JB005402.
  7. Wallace, Shamus C.; Nobes, David C.; Davis, Kenneth J.; Burbank, Douglas W.; White, A. (2010). "Three-dimensional GPR imaging of the Benmore anticline and step-over of the Ostler Fault, South Island, New Zealand". Geophysical Journal International. 180 (2): 465–474. Bibcode:2010GeoJI.180..465W. doi:10.1111/j.1365-246X.2009.04400.x. S2CID 14211194.
  8. Barrell, DJA (2018). "General distribution and characteristics of active faults and folds in the Queenstown Lakes and Central districts, Otago:GNS Science Consultancy Report 2018/207" (PDF). Retrieved 6 May 2023.
  9. van Dissen, RJ; Hull, AG; Read, SAL (1994). "Timing of some large Holocene earthquakes on the Ostler Fault, New Zealand". Proceedings of the Proceedings of the Eighth International Symposium on Recent Crustal Movements (CRCM'93), Kobe. 1993: 381–386.
  10. Barrell, DJA; Strong, DA (2010). "General distribution and characteristics of active faults and folds in the Mackenzie District, South Canterbury:GNS Science Consultancy Report 2010/147". Retrieved 6 May 2023.

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.