Württemberg C

The steam locomotives of the Württemberg Class C were built for the Royal Württemberg State Railways in the early 20th century and were Pacifics designed for hauling express trains. They were the smallest state railway Länderbahn locomotives with a 4-6-2 wheel arrangement.

Württemberg Class C
DRG Class 18.1
Hauling the Orient Express
Type and origin
BuilderEsslingen
Build date1909–1921
Total produced41
Specifications
Configuration:
  Whyte4-6-2
Gauge1,435 mm (4 ft 8+12 in)
Leading dia.1,000 mm (3 ft 3+14 in)
Driver dia.1,800 mm (5 ft 10+34 in)
Trailing dia.1,250 mm (4 ft 1+14 in)
Length:
  Over beams21,855 mm (71 ft 8+12 in)
Axle load15.9 tonnes (15.6 long tons; 17.5 short tons)
Adhesive weight47.7 tonnes (46.9 long tons; 52.6 short tons)
Service weight85.2 tonnes (83.9 long tons; 93.9 short tons)
Water cap.20.0 or 30.0 m3 (4,400 or 6,600 imp gal; 5,300 or 7,900 US gal)
Boiler pressure15 kg/cm2 (1.47 MPa; 213 psi)
Heating surface:
  Firebox
3.96 m2 (42.6 sq ft)
  Evaporative205.14 m2 (2,208.1 sq ft)
Superheater:
  Heating area54.43 m2 (585.9 sq ft)
Piston stroke612 mm (24+18 in)
High-pressure cylinder420 mm (16+916 in)
Low-pressure cylinder620 mm (24+716 in)
Performance figures
Maximum speed115–120 km/h (71–75 mph)
Indicated power1,840 PS (1,350 kW; 1,810 hp)
Career
Numbers
  • K.W.St.E.: 2001–2041
  • DRG: 18 101–137
Retired1955

History

The 41 C class locomotives were built between 1909 and 1921 by Maschinenfabrik Esslingen. They were designed from the outset for the steep gradients in Württemberg and therefore had smaller driving wheels with only a 1,800 mm diameter. Despite being the smallest engines with a Pacific configuration, they were economical, yet at the same time very powerful. In all, 41 units of this class were manufactured.

The appearance of the locomotives was relatively unusual at the time. Striking features included the outside subframe and the streamlined shape of the driver's cab and smokebox, resembling that of the Bavarian S 2/6 4-4-4 express locomotive and the later S 3/6 Pacifics. The locomotives were also known as "the beautiful Württemberg lass" (die schöne Württembergerin) due to this unique form.

After the First World War, three engines were given to France where they became the État class 231 and one to Poland where it became the sole example of the Om101 class. The remaining 37 were taken over by the Deutsche Reichsbahn as DRG Class 18.1, where they were given the running numbers 18 101–137. They were even taken over by the Deutsche Bundesbahn, but retired by 1955. The last two examples were numbers 18 133 and 18 136, which were stabled in Ulm during their final years.

The locomotives were equipped with wü 2'2' T 20 and wü 2'2' T30 tenders.

France

The three locomotives surrendered to France, 2021, 2026 and 2027, were allocated to the Chemins de Fer de l'État, where they were numbered 231–997 to 231–999. They were used until 1937, when they were placed into store for use as steam generators. The SNCF allocated them the numbers 3–231.A.997 to 999, but the locomotives never carried these numbers. The three locomotives were destroyed in an air raid on 13 May 1944 and subsequently scrapped.[1]

Models

The German model railway manufacturer Märklin has produced models of the Wuttemburg C class as part of its HO and Z scale range in K.W.St.E green or grey as the C class, and in black as the DRG or DB 18.1 class. Roco has produced a model of the C class in HO scale with part number 43216.[2]


See also

References

  1. Davies 2001, p. 83.
  2. "Original Roco" (PDF). roco.cc. Retrieved 6 September 2023.
  • Davies, John (August 2001). Chemins de fer de l'État Locomotive List 1878–1938. Woodbridge, Queensland: Dr. John Davies. ISBN 0-7316-8442-7.
  • Weisbrod, Manfred; Müller, Hans; Petznik, Wolfgang (1976). Dampflokomotiven deutscher Eisenbahnen, Baureihe 01–39 (EFA 1.1) (in German) (3rd ed.). Düsseldorf: Alba Buchverlag. pp. 135–137. ISBN 3-87094-081-6.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.