Rhodesia Railways 20th class

The Rhodesia Railways 20th class, later Zambia Railways and National Railways of Zimbabwe 20th classes, were among the largest and most powerful steam locomotives in the southern hemisphere.

Rhodesia Railways 20th class
Zambia Railways 20th class
National Railways of Zimbabwe 20th class
NRZ 20A class No. 747, at the coal stage, Dete, July 1990
Type and origin
Power typeSteam
BuilderBeyer, Peacock and Company
Build date1954–1958
Total produced61
Specifications
Configuration:
​
 • Whyte4-8-2+2-8-4
 • UIC(2′D1′)(1′D2′) h4t
Gauge3 ft 6 in (1,067 mm) Cape gauge
Driver dia.51 in (1,295 mm)
Length103 ft 2 in (31.45 m)
Fuel typeCoal
Firebox:
 • Firegrate area		63 sq ft (5.9 m2)
Boiler pressure200 psi (1.38 MPa)
Heating surface3,025 sq ft (281.0 m2)
 • Tubes and flues2,790 sq ft (259 m2)
 • Firebox235 sq ft (21.8 m2)
Superheater:
​
 • Heating area750 sq ft (70 m2)
CylindersFour
Cylinder size20 in × 26 in (508 mm × 660 mm)
Train brakesVacuum
Career
OperatorsRhodesia Railways
Zambia Railways
National Railways of Zimbabwe
Class20th, 20A
NumbersRR: 700–760
NRZ: 730–737, 740–750
Withdrawn1970–1992

With 61 locomotives built, they were the fourth largest class of Garratt locomotive built – after the South African Railways class GMA, (120), the Rhodesia Railways 15th class, (74) and the South African Railways class GF (65).

Design

The locomotives have a 4-8-2+2-8-4 of "Double Mountain" wheel arrangement. This arrangement was also used by most other large Garratts.

The 20th class was the first and only class of Rhodesia Railways locomotives to be fitted with mechanical stokers. Other technical features included bar frames and thermic syphons.

The later locomotives were classified as 20A class; the main difference being that the 20ths' inside and outside trailing wheels were of the same size, on the 20A, the inside trailing wheels diameter had been increased in size. The 20As were also heavier.

The 20th class also had the round-ended bunkers characteristic of late Garratts.

Table of 20th and 20A class orders
YearQtyBP Order No.BP Works No.RR ClassRR No.Notes
195415111667685–769920th700–714
19576111827780–778520th715–720
19579111827786–779420A721–729
195715111837795–780920A730–744
1957–5816111847810–782520A745–760

The early years

The initial use of the 20th class was ill-fated. The locomotives were plagued with teething troubles including cracks in the locomotives' frames and fireboxes. Unlike the South African Railways' GMA, which had cast steel frames, the 20th had conventional fabricated bar frames.

Two locomotives were scrapped very early due to accident damage. Strangely, they were the first (700) and the last (760) built.

Apart from these problems, the locomotives met all expectations. They were by far the most powerful locomotives on the Rhodesia Railways, and were rated to pull 1,250 long tons (1,270 t) up a 1.55% (1 in 64) incline.

Later service

In 1964, Zambia took over the operation of railways in its territory. This included the transfer of 80–90 locomotives[1] – about half of them 20th and 20A class locomotives. This left only fifteen 20ths in [Southern] Rhodesia. They later re-acquired four from Zambia Railways when the latter dieselised.[2]

These nineteen locomotives were 705, 707, 709, 710, 714, 716, 717 and 718 (20th) and 723, 724, 726, 727, 729, 738, 746, 747, 749, 753 and 756 (20A) were mainly used in the transportation of coal between Thomson Junction to Bulawayo and Victoria Falls. On this route they were rated with a maximum load of 1,600 long tons (1,630 t).[1]

In Zambia, the 20th class was replaced by diesels and retired by about 1970.

By June 1975, there were only 18 in service in Rhodesia, all allocated to Bulawayo.[1]

In 1979 / 1980 Zambia briefly placed four back into service due to an oil shortage. One ran with "ZR" painted in large letters on the tender.

Rebuilding

In 1978 Rhodesia Railways started a rebuilding program for its steam locomotive fleet. Between 1980 and 1983 the remaining Garratt locomotives were completely overhauled and had some modernisation, including the installation of roller bearings. The work was undertaken by private companies, especially the RESSCO works in Bulawayo.

Work on the first two was completed in 1980, although it was April 1983 before they were all dealt with.

As part of the rebuilding programme, the locomotives' running numbers were consolidated into two blocks: 730–737 (20th) and 740–750 (20A). Three locomotives kept their old numbers: 746, 747, and 749. At the same time, the locomotives received names; the locally cast nameplates were applied to the cabside above the numberplate.[3]

Post rebuilding service
No. 748 Lukozi with a freight train at Sawmills, Zimbabwe, August 1992
No. 748 Lukozi with a freight train at Sawmills, Zimbabwe, August 1992

All the rebuilt 20th and 20A locomotives were allocated to Bulawayo.

Due to the continuing difficult economic situation in Zimbabwe, the rebuilt steam locomotives remained in service longer than originally planned.

Finally, in the early 1990s, new diesels were ordered and the locomotives were systematically withdrawn as they became due for general overhaul. All were withdrawn from general service by 1994.

All those allocated to Bulawayo with the exception of 730/740/742/749 (retained for museum activity and spare parts) were then put up for tender and scrapped as part of the contract to purchase Canadian diesel locomotives. 736 was later saved, See below.

Preservation

These locomotives survive as of February 2019.

  • 708 is in the Railway Museum of Livingstone
  • 730 (formerly No. 705) belongs to the Bulawayo Railway Museum where it is on display. It was last steamed in 2004.
  • 736 was purchased by tender by the author, A.D. (Dusty) Durrant for US$24,000. It was then stored at Bulawayo Railway Museum. Upon his death in 1999 it was willed to the museum where it remains on display.
  • 740 is still in use as a stationary boiler at Bulawayo steam shed (January 2019)
  • 742 remains dumped at Bulawayo Steam Shed
  • 741 is plinthed at the station in Ndola
  • 749 remains dumped at Bulawayo Steam Shed
  • 758 is plinthed at the station in Kitwe

References

Notes
  1. Turk 1976, p. 76
  2. Here Durrant gives 14 +4, totalling 18; but 19 units are listed. It could therefore have been 14+5 locomotives.
  3. Eatwell 2011, p. 517

Bibliography
  • Durrant, A. E. Garratt Locomotives of the World.
  • Eatwell, David (August 2011). "Hunting Garratts in Zimbabwe". Continental Modeller. Beer, Seaton, Devon: Peco Publications. pp. 516–521.
  • Eatwell, David (September 2011). "Hunting Garratts in Zimbabwe". Continental Modeller. Beer, Seaton, Devon: Peco Publications. pp. 588–591.
  • Turk, Andrew (February 1976). "Garratts Galore". Railway World: 76–78.
  • Smith, J. D. H. "Rhodesia Railways steam locomotives". Standard Steam Locomotives. Retrieved 2012-09-27.

Media related to Rhodesia Railways 20th class at Wikimedia Commons

External video
video icon Zimbabwe Steam: Bulawayo - Garratt City #1 - April 1997 A few scenes of Bulawayo in 1997 with Classes 14A, 15A and 16A Garratts at work on various duties around the city, along with shed and workshop scenes. (Time 12:16)
External video
video icon Zimbabwe Steam: Bulawayo - Garratt City #2 - April 1997 Some morning scenes at Bulawayo Steam Shed in 1997 with 14A, 15A and 16A Garratts leaving the shed. Then we see 15A 417 "Umathebene" hauling a goods train out to Cement and shunting the yard there. (Time 5:38)
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.