mmap

The original design of memory-mapped files came from the TOPS-20 operating system. mmap and associated systems calls were designed as part of the Berkeley Software Distribution (BSD) version of Unix. Their API was already described in the 4.2BSD System Manual, even though it was neither implemented in that release, nor in 4.3BSD.[1] Sun Microsystems had implemented this very API, though, in their SunOS operating system. The BSD developers at University of California, Berkeley unsuccessfully requested Sun to donate its implementation; 4.3BSD-Reno was instead shipped with an implementation based on the virtual memory system of Mach.[2]

File-backed mapping maps an area of the process's virtual memory to files; that is, reading those areas of memory causes the file to be read. It is the default mapping type.

Anonymous mapping maps an area of the process's virtual memory not backed by any file. The contents are initialized to zero.[3] In this respect an anonymous mapping is similar to malloc, and is used in some malloc implementations for certain allocations, particularly large ones. Anonymous mappings are not part of the POSIX standard, but are implemented in almost all operating systems by the MAP_ANONYMOUS and MAP_ANON flags.

If the mapping is shared (the MAP_SHARED flag is set), then it is preserved when a process is forked (using a fork(2) system call). Therefore, writes to a mapped area in one process are immediately visible in all related (parent, child or sibling) processes. If the mapping is shared and backed by a file (not MAP_ANONYMOUS) the underlying file medium is only guaranteed to be written after it is passed to the msync(2) system call. In contrast, if the mapping is private (the MAP_PRIVATE flag is set), the changes will neither be seen by other processes nor written to the file.

A process reading from, or writing to, the underlying file will not always see the same data as a different process that has mapped the file, since segments of the file are copied into RAM and only periodically flushed to disk. Synchronization can be forced with a call to msync(2).

Using mmap on files can significantly reduce memory overhead for applications accessing the same file; they can share the memory area the file encompasses, instead of loading the file for each application that wants access to it. This means that mmap(2) is sometimes used for Interprocess Communication (IPC). On modern operating systems, mmap(2) is typically preferred to the System V IPC Shared Memory facility.[4]

The main difference between System V shared memory (shmem) and memory mapped I/O (mmap) is that System V shared memory is persistent: unless explicitly removed by a process, it is kept in memory and remains available until the system is shut down. mmap'd memory is not persistent between application executions (unless it is backed by a file).

#include <sys/types.h>
#include <sys/mman.h>
#include <err.h>
#include <fcntl.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>

/* This example shows how an mmap of /dev/zero is equivalent to
   using anonymous memory (MAP_ANON) not connected to any file.
   N.B. MAP_ANONYMOUS or MAP_ANON are supported by most UNIX
   versions, removing the original purpose of /dev/zero.
*/
/* Does not work on OS X or macOS, where you can't mmap over /dev/zero */
int main(void)
{
        const char str1[] = "string 1";
        const char str2[] = "string 2";
        pid_t parpid = getpid(), childpid;
        int fd = -1;
        char *anon, *zero;

        if ((fd = open("/dev/zero", O_RDWR, 0)) == -1)
                err(1, "open");

        anon = (char*)mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_ANON|MAP_SHARED, -1, 0);
        zero = (char*)mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);

        if (anon == MAP_FAILED || zero == MAP_FAILED)
                errx(1, "either mmap");

        strcpy(anon, str1);
        strcpy(zero, str1);

        printf("PID %d:\tanonymous %s, zero-backed %s\n", parpid, anon, zero);
        switch ((childpid = fork())) {
        case -1:
                err(1, "fork");
                /* NOTREACHED */
        case 0:
                childpid = getpid();
                printf("PID %d:\tanonymous %s, zero-backed %s\n", childpid, anon, zero);
                sleep(3);

                printf("PID %d:\tanonymous %s, zero-backed %s\n", childpid, anon, zero);
                munmap(anon, 4096);
                munmap(zero, 4096);
                close(fd);
                return EXIT_SUCCESS;
        }

        sleep(2);
        strcpy(anon, str2);
        strcpy(zero, str2);

        printf("PID %d:\tanonymous %s, zero-backed %s\n", parpid, anon, zero);
        munmap(anon, 4096);
        munmap(zero, 4096);
        close(fd);
        return EXIT_SUCCESS;
}

sample output:

PID 22475:      anonymous string 1, zero-backed string 1
PID 22476:      anonymous string 1, zero-backed string 1
PID 22475:      anonymous string 2, zero-backed string 2
PID 22476:      anonymous string 2, zero-backed string 2

The mmap system call has been used in various database implementations as an alternative for implementing a buffer pool, although this created a different set of problems that could realistically only be fixed using a buffer pool.[5]

• Virtual memory for when there is more address space than physical memory
• Paging for the implementation of virtual memory
• Page cache for a disk caching mechanism utilized by mmap
• Demand paging for a scheme implemented by mmap

• Description from POSIX standard
• Differences:
  • DragonFly BSD
  • FreeBSD
  • NetBSD
  • OpenBSD
  • illumos
  • Mac OS X
  • Solaris
  • HP-UX
  • QNX
• Windows
  • MapViewOfFile win32 function is somewhat equivalent to mmap.
• More example source code:
  • SharedHashFile, An open source, shared memory hash table implemented using mmap().