1991 Uttarkashi earthquake

The 1991 Uttarkashi earthquake (also known as the Garhwal earthquake) occurred at 02:53:16 Indian Standard Time (UTC+05:30) on 20 October with a moment magnitude of 6.8 and a maximum Mercalli intensity of IX (Violent). This thrust event was instrumentally recorded and occurred along the Main Central Thrust in the Uttarkashi and Gharwal regions of the Indian state of Uttarakhand (then still part of Uttar Pradesh). High intensity shaking resulted in the deaths of at least 768 people and the destruction of thousands of homes.

1991 Uttarkashi earthquake
1991 Uttarkashi earthquake is located in India
Lahore
Lahore
Delhi
Delhi
Kathmandu
Kathmandu
1991 Uttarkashi earthquake
UTC time1991-10-19 21:23:14
ISC event317038
USGS-ANSSComCat
Local date20 October 1991
Local time02:53 Indian Standard Time (UTC+5:30)
Duration~ 45 seconds[1]
Magnitude6.8 Mw[2]
Depth11.6 km (7 mi)[2]
Epicenter30.75°N 78.82°E / 30.75; 78.82[2]
TypeReverse[3]
Areas affectedUttar Pradesh
India
Total damage$60 million[4]
Max. intensityIX (Violent) [5]
Peak acceleration0.31 g[5]
Casualties768–2,000 dead[3]
1,383–1,800 injured[3]

Tectonic setting

The Garhwal division in northern India, flanked by the Tons River to the west and the Alaknanda River to the east, is located at the boundary of the Indian and Eurasian tectonic plates. In the region, the Indian Plate is moving northeastward at a rate of 5 centimeters (2.0 in) per year. The Main Central Thrust is the primary northwest-striking structure and dips to the north at 30–40°. The fault plane solutions from the parametric catalogs for the 1991 and 1999 events showed low-angle thrust faulting with varying amounts of strike-slip movement.[6]

Earthquake

Six three-axis accelerometers that were within 60 km (37 mi) captured the event, including two units that were close to the projection of the fault at the surface. Analysis of the data recorded by these devices revealed the distribution of slip, moment release over time, and the location of the maximum slip. The mechanism of the event was typical of the thrust system of the Himalayas, with maximum slip (1.5 m (4 ft 11 in)) occurring to the west and southwest of the hypocenter. Energy release began slowly and built to a crescendo four seconds after the initiation of the rupture.[7]

USGS ShakeMap for the event

Damage

Scientists from the Indian Institute of Technology Kanpur (IITK) conducted a survey of the affected areas between 27 October and 4 November. Their work revealed that more than 300,000 people in 1,294 villages were affected by the shock. Stone masonry homes (that usually supported heavy roofs) fared badly in areas where high intensity shaking occurred. The United States' National Geophysical Data Center indicates that 7,500 homes were damaged and another 7,500 were destroyed while the IITK report shows that up to 42,400 houses were damaged.[4][8]

The United States' National Geophysical Data Center and the Belgian Centre for Research on the Epidemiology of Disasters' EM-DAT database both list 1,500 fatalities for the event with EM-DAT also listing 1,383 injuries. The USGS' Preliminary Determination of Epicenters and the Utsu catalog both list 2,000 deaths and 1,800 injured.[3]

Intensity

Jain et al. 1992 stated that the shock was generally moderate while further clarifying the intensities that were observed at specific locations. Ghansyali, Gongotri, and Tehri were listed as experiencing intensity VII (Very strong) shaking and Bhatwari, Budhakedar, Krishanpur, Mahinanda, Maneri, and Uttarkashi were listed as experiencing intensity VIII (Severe) shaking. In a report that documented the study of strong motion recordings of the event, Jain & Das 1993 clarified that while Bhatwari and Uttarkashi experienced intensity VIII shaking at distances of 25 km (16 mi) and 40 km (25 mi) respectively, there was a small 20 km square mile area that experienced a maximum intensity of IX (Violent).[5][8]

See also

References

  1. Kayal, J. R. (2015), "Precursor seismicity, foreshocks and aftershocks of the Uttarkashi earthquake of October 20, 1991 at Garhwal Himalaya", Tectonophysics, 263 (1–3): 339, Bibcode:1996Tectp.263..339K, doi:10.1016/S0040-1951(97)81488-6
  2. ISC (2016), ISC-GEM Global Instrumental Earthquake Catalogue (1900–2012), Version 3.0, International Seismological Centre
  3. USGS (4 September 2009), PAGER-CAT Earthquake Catalog, Version 2008_06.1, United States Geological Survey
  4. National Geophysical Data Center / World Data Service (NGDC/WDS) (1972), Significant Earthquake Database (Data Set), National Geophysical Data Center, NOAA, doi:10.7289/V5TD9V7K
  5. Jain, Sudhir K.; Das, Satrajit (1993), "Analysis of Strong Motion Records from Uttarkashi Earthquake for Assessment of Code Provisions for Different Seismic Zones" (PDF), Earthquake Spectra, 9 (4): 739, 742, Bibcode:1993EarSp...9..739J, doi:10.1193/1.1585738, S2CID 128901914
  6. Gupta, D. K.; Bhowmick, D.; Roy, P. N. S. (2015), "Himalayan hazard study on the basis of stress and strain state of 1991 Uttarkashi earthquake using Coulomb stress transfer model", Geomatics, Natural Hazards, and Risk, 6 (2): 133, 140, Bibcode:2015GNHR....6..131G, doi:10.1080/19475705.2013.820797
  7. Cotton, F.; Campillo, M.; Deschamps, A.; Rastogi, B. K. (1991), "Rupture history and seismotectonics of the 1991 Uttarkashi, Himalaya earthquake", Tectonophysics, 258 (1–4): 35–51, Bibcode:1996Tectp.258...35C, doi:10.1016/0040-1951(95)00154-9
  8. Jain, Sudhir. K.; Singh, Ramesh P.; Gupta, Vinay K.; Nagar, Amit (1992), Garhwal Earthquake of Oct. 20, 1991 (PDF), EERI Special Earthquake Report, vol. 26, National Information Centre of Earthquake Engineering, pp. 1–3

Further reading

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.