Vulcain (rocket engine)

The Vulcain rocket engine is named in French for Vulcan, the ancient Roman god of fire. Its development, carried out by a European partnership, began in 1988 with the Ariane 5 rocket program.[11] It first flew in 1996 powering the ill-fated flight 501 without being the cause of the disaster, and had its first successful flight in 1997 (flight 502).

In 2002 the upgraded Vulcain 2 with 20% more thrust[12] first flew on flight 157, although a problem with the engine turned the flight into a failure.[13] The cause was due to flight loads being much higher than expected, as the inquiry board concluded.[14] Subsequently, the nozzle was redesigned to include mechanical reinforcement of the structure and improvement of the thermal situation of the tube wall through enhancing hydrogen coolant flow as well as applying a thermal barrier coating to the flame-facing side of the coolant tubes.[14] The first successful flight of the (partially redesigned) Vulcain 2 occurred in 2005 on flight 521.[13]

The Vulcain is a gas-generator cycle rocket engine fed with cryogenic liquid oxygen and liquid hydrogen. It features regenerative cooling through a tube wall design, and the Vulcain 2 introduced a particular film cooling for the lower part of the nozzle, where exhaust gas from the turbine is re-injected in the engine.[14] It powers the first stage of the Ariane 5 launcher, the EPC (Étage Principal Cryotechnique, main cryogenic stage) and provide 8% of the total lift-off thrust[17] (the rest being provided by the two solid rocket boosters). The engine operating time is 600 s in both configurations.[18] 3 m tall and 1.76 m in diameter, the engine weighs 1686 kg and provides 137 t of thrust in its latest version.[19] The oxygen turbopump rotates at 13600 rpm with a power of 3 MW while the hydrogen turbopump rotates at 34000 rpm with 12 MW of power. The total mass flow rate is 235 kg/s, of which 41.2 kg/s are of hydrogen.

The main contractor for the Vulcain engines is Snecma Moteurs (France), which also provides the liquid hydrogen turbopump. The liquid oxygen turbopump is the responsibility of Avio (Italy), and the gas turbines that power the turbopumps and the nozzle are developed by GKN (Formerly Volvo) (Sweden).[17]

• Comparison of orbital rocket engines
• Spacecraft propulsion
• Timeline of hydrogen technologies

Wikimedia Commons has media related to Vulcain.

• Arianespace – Ariane 5: Cryogenic Main Stage and Solid Boosters
• Ariane 5 ECA and Snecma – Snecma Moteurs: Vulcain 2 engine proves its mettle
• "LH2 Turbine (Vulcain and Vulcain 2 engines)" (PDF). Archived from the original (PDF) on 22 March 2011. – Volvo Aero
• "LOX Turbine (Vulcain and Vulcain 2 engines)" (PDF). Archived from the original (PDF) on 1 January 2011. – Volvo Aero
• "Development of the turbines for the Vulcain 2 turbopumps" (PDF). Archived from the original (PDF) on 2007-09-30. – Volvo Aero
• "High cycle fatigue of Vulcain 2 LOx turbine blades" (PDF). Archived from the original (PDF) on 2007-09-27. – Volvo Aero
• "An efficient concept design process" (PDF). Archived from the original (PDF) on 2007-09-27. – Volvo Aero
• "Vulcain 2 nozzle" (PDF). Archived from the original (PDF) on 22 March 2011. – Volvo Aero