Tensor operator

The rotation operator about the unit vector n (defining the axis of rotation) through angle θ is

$${\displaystyle U[R(\theta ,{\hat {\mathbf {n} }})]=\exp \left(-{\frac {i\theta }{\hbar }}{\hat {\mathbf {n} }}\cdot \mathbf {J} \right)}$$

where J = (J_x, J_y, J_z) are the rotation generators (also the angular momentum matrices):

$${\displaystyle J_{x}={\frac {\hbar }{\sqrt {2}}}{\begin{pmatrix}0&1&0\\1&0&1\\0&1&0\end{pmatrix}}\,\quad J_{y}={\frac {\hbar }{\sqrt {2}}}{\begin{pmatrix}0&i&0\\-i&0&i\\0&-i&0\end{pmatrix}}\,\quad J_{z}=\hbar {\begin{pmatrix}-1&0&0\\0&0&0\\0&0&1\end{pmatrix}}}$$

and let ${\displaystyle {\widehat {R}}={\widehat {R}}(\theta ,{\hat {\mathbf {n} }})}$ be a rotation matrix. According to the Rodrigues' rotation formula, the rotation operator then amounts to

$${\displaystyle U[R(\theta ,{\hat {\mathbf {n} }})]=1\!\!1-{\frac {i\sin \theta }{\hbar }}{\hat {\mathbf {n} }}\cdot \mathbf {J} -{\frac {1-\cos \theta }{\hbar ^{2}}}({\hat {\mathbf {n} }}\cdot \mathbf {J} )^{2}.}$$

An operator ${\displaystyle {\widehat {\Omega }}}$ is invariant under a unitary transformation U if

$${\displaystyle {\widehat {\Omega }}={U}^{\dagger }{\widehat {\Omega }}U;}$$

in this case for the rotation ${\displaystyle {\widehat {U}}(R)}$,

$${\displaystyle {\widehat {\Omega }}={U(R)}^{\dagger }{\widehat {\Omega }}U(R)=\exp \left({\frac {i\theta }{\hbar }}{\hat {\mathbf {n} }}\cdot \mathbf {J} \right){\widehat {\Omega }}\exp \left(-{\frac {i\theta }{\hbar }}{\hat {\mathbf {n} }}\cdot \mathbf {J} \right).}$$

The orthonormal basis set for total angular momentum is ${\displaystyle |j,m\rangle }$, where j is the total angular momentum quantum number and m is the magnetic angular momentum quantum number, which takes values −j, −j + 1, ..., j − 1, j. A general state within the j subspace

$${\displaystyle |\psi \rangle =\sum _{m}c_{jm}|j,m\rangle }$$

rotates to a new state by:

$${\displaystyle |{\bar {\psi }}\rangle =U(R)|\psi \rangle =\sum _{m}c_{jm}U(R)|j,m\rangle }$$

Using the completeness condition:

$${\displaystyle I=\sum _{m'}|j,m'\rangle \langle j,m'|}$$

we have

$${\displaystyle |{\bar {\psi }}\rangle =IU(R)|\psi \rangle =\sum _{mm'}c_{jm}|j,m'\rangle \langle j,m'|U(R)|j,m\rangle }$$

Introducing the Wigner D matrix elements:

$${\displaystyle {D(R)}_{m'm}^{(j)}=\langle j,m'|U(R)|j,m\rangle }$$

gives the matrix multiplication:

$${\displaystyle |{\bar {\psi }}\rangle =\sum _{mm'}c_{jm}D_{m'm}^{(j)}|j,m'\rangle \quad \Rightarrow \quad |{\bar {\psi }}\rangle =D^{(j)}|\psi \rangle }$$

For one basis ket:

$${\displaystyle |{\overline {j,m}}\rangle =\sum _{m'}{D(R)}_{m'm}^{(j)}|j,m'\rangle }$$

For the case of orbital angular momentum, the eigenstates ${\displaystyle |\ell ,m\rangle }$ of the orbital angular momentum operator L and solutions of Laplace's equation on a 3d sphere are spherical harmonics:

$${\displaystyle Y_{\ell }^{m}(\theta ,\phi )=\langle \theta ,\phi |\ell ,m\rangle ={\sqrt {{(2\ell +1) \over 4\pi }{(\ell -m)! \over (\ell +m)!}}}\,P_{\ell }^{m}(\cos {\theta })\,e^{im\phi }}$$

where P_ℓ^m is an associated Legendre polynomial, ℓ is the orbital angular momentum quantum number, and m is the orbital magnetic quantum number which takes the values −ℓ, −ℓ + 1, ... ℓ − 1, ℓ The formalism of spherical harmonics have wide applications in applied mathematics, and are closely related to the formalism of spherical tensors, as shown below.

Spherical harmonics are functions of the polar and azimuthal angles, ϕ and θ respectively, which can be conveniently collected into a unit vector n(θ, ϕ) pointing in the direction of those angles, in the Cartesian basis it is:

$${\displaystyle {\hat {\mathbf {n} }}(\theta ,\phi )=\cos \phi \sin \theta \mathbf {e} _{x}+\sin \phi \sin \theta \mathbf {e} _{y}+\cos \theta \mathbf {e} _{z}}$$

So a spherical harmonic can also be written ${\displaystyle Y_{\ell }^{m}=\langle \mathbf {n} |\ell m\rangle }$. Spherical harmonic states ${\displaystyle |m,\ell \rangle }$ rotate according to the inverse rotation matrix ${\displaystyle U(R^{-1})}$, while ${\displaystyle |\ell ,m\rangle }$ rotates by the initial rotation matrix ${\displaystyle {\widehat {U}}(R)}$.

$${\displaystyle |{\overline {\ell ,m}}\rangle =\sum _{m'}D_{m'm}^{(\ell )}[U(R^{-1})]|\ell ,m'\rangle \,,\quad |{\overline {\hat {\mathbf {n} }}}\rangle =U(R)|{\hat {\mathbf {n} }}\rangle }$$

A scalar operator is invariant under rotations:[2]

$${\displaystyle U(R)^{\dagger }{\widehat {S}}U(R)={\widehat {S}}}$$

This is equivalent to saying a scalar operator commutes with the rotation generators:

$${\displaystyle \left[{\widehat {S}},{\widehat {\mathbf {J} }}\right]=0}$$

Examples of scalar operators include

• the energy operator:
  $${\displaystyle {\widehat {E}}\psi =i\hbar {\frac {\partial }{\partial t}}\psi }$$

  
• potential energy V (in the case of a central potential only)
  $${\displaystyle {\widehat {V}}(r,t)\psi (\mathbf {r} ,t)=V(r,t)\psi (\mathbf {r} ,t)}$$

  
• kinetic energy T:
  $${\displaystyle {\widehat {T}}\psi (\mathbf {r} ,t)=-{\frac {\hbar ^{2}}{2m}}(\nabla ^{2}\psi )(\mathbf {r} ,t)}$$

  
• the spin–orbit coupling:
  $${\displaystyle {\widehat {\mathbf {L} }}\cdot {\widehat {\mathbf {S} }}={\widehat {L}}_{x}{\widehat {S}}_{x}+{\widehat {L}}_{y}{\widehat {S}}_{y}+{\widehat {L}}_{z}{\widehat {S}}_{z}\,.}$$

  

Vector operators (as well as pseudovector operators) are a set of 3 operators that can be rotated according to:[2]

$${\displaystyle {U(R)}^{\dagger }{\widehat {V}}_{i}U(R)=\sum _{j}R_{ij}{\widehat {V}}_{j}}$$

Any observable vector quantity of a quantum mechanical system should be invariant of the choice of frame of reference. The transformation of expectation value vector which applies for any wavefunction, ensures the above equality. In Dirac notation:

$${\displaystyle \langle {\bar {\psi }}|{\widehat {V}}_{a}|{\bar {\psi }}\rangle =\langle \psi |{U(R)}^{\dagger }{\widehat {V}}_{a}U(R)|\psi \rangle =\sum _{b}R_{ab}\langle \psi |{\widehat {V}}_{b}|\psi \rangle }$$

where the RHS is due to the rotation transformation acting on the vector formed by expectation values. Since |Ψ⟩ is any quantum state, the same result follows:

$${\displaystyle {U(R)}^{\dagger }{\widehat {V}}_{a}U(R)=\sum _{b}R_{ab}{\widehat {V}}_{b}}$$

Note that here, the term "vector" is used two different ways: kets such as |ψ⟩ are elements of abstract Hilbert spaces, while the vector operator is defined as a quantity whose components transform in a certain way under rotations.

From the above relation for infinitesimal rotations and the Baker Hausdorff lemma, by equating coefficients of order ${\displaystyle \delta \theta }$, one can derive the commutation relation with the rotation generator:[2]

$${\displaystyle {\left[{\widehat {V}}_{a},{\widehat {J}}_{b}\right]=\sum _{c}i\hbar \varepsilon _{abc}{\widehat {V}}_{c}}}$$

where ε_ijk is the Levi-Civita symbol, which all vector operators must satisfy, by construction. The above commutator rule can also be used as an alternative definition for vector operators which can be shown by using the Baker Hausdorff lemma. As the symbol ε_ijk is a pseudotensor, pseudovector operators are invariant up to a sign: +1 for proper rotations and −1 for improper rotations.

Since operators can be shown to form a vector operator by their commutation relation with angular momentum components (which are generators of rotation), its examples include:

• the position operator:
  $${\displaystyle {\widehat {\mathbf {r} }}\psi =\mathbf {r} \psi }$$

  
• the momentum operator:
  $${\displaystyle {\widehat {\mathbf {p} }}\psi =-i\hbar \nabla \psi }$$

  

and peusodovector operators include

• the orbital angular momentum operator:
  $${\displaystyle {\widehat {\mathbf {L} }}\psi =-i\hbar \mathbf {r} \times \nabla \psi }$$

  
• as well the spin operator S, and hence the total angular momentum
  $${\displaystyle {\widehat {\mathbf {J} }}={\widehat {\mathbf {L} }}+{\widehat {\mathbf {S} }}\,.}$$

  

If ${\displaystyle {\vec {V}}}$ and ${\displaystyle {\vec {W}}}$ are two vector operators, the dot product between the two vector operators can be defined as:

${\displaystyle {\vec {V}}\cdot {\vec {W}}=\sum _{i=1}^{3}{\hat {V_{i}}}{\hat {W_{i}}}}$

Under rotation of coordinates, the newly defined operator transforms as:

$${\displaystyle {U(R)}^{\dagger }({\vec {V}}\cdot {\vec {W}})U(R)={U(R)}^{\dagger }\left(\sum _{i=1}^{3}{\hat {V_{i}}}{\hat {W_{i}}}\right)U(R)=\sum _{i=1}^{3}({U(R)}^{\dagger }{\hat {V}}_{i}U(R))({U(R)}^{\dagger }{\hat {W}}_{i}U(R))=\sum _{i=1}^{3}\left(\sum _{j=1}^{3}R_{ij}{\widehat {V}}_{j}\cdot \sum _{k=1}^{3}R_{ik}{\widehat {W}}_{k}\right)}$$

Rearranging terms and using transpose of rotation matrix as its inverse property:

$${\displaystyle {U(R)}^{\dagger }({\vec {V}}\cdot {\vec {W}})U(R)=\sum _{k=1}^{3}\sum _{j=1}^{3}\left(\sum _{i=1}^{3}R_{ji}^{T}R_{ik}\right){\widehat {V}}_{j}{\widehat {W}}_{k}=\sum _{k=1}^{3}\sum _{j=1}^{3}\delta _{j,k}{\widehat {V}}_{j}{\widehat {W}}_{k}=\sum _{i=1}^{3}{\widehat {V}}_{i}{\widehat {W}}_{i}}$$

Where the RHS is the ${\displaystyle {\vec {V}}\cdot {\vec {W}}}$ operator originally defined. Since the dot product defined is invariant under rotation transformation, it is said to be a scalar operator.

A vector operator in the spherical basis is V = (V₊₁, V₀, V₋₁) where the components are:[2]

$${\displaystyle V_{+1}=-{\frac {1}{\sqrt {2}}}(V_{x}+iV_{y})\,\quad V_{-1}={\frac {1}{\sqrt {2}}}(V_{x}-iV_{y})\,,\quad V_{0}=V_{z}\,,}$$

using ${\textstyle J_{\pm }=J_{x}\pm iJ_{y}\,,}$ the various commutators with the rotation generators and ladder operators are:

$${\displaystyle {\begin{aligned}\left[J_{z},V_{+1}\right]&=+\hbar V_{+1}\\[1ex]\left[J_{z},V_{0}\right]&=0V_{0}\\[1ex]\left[J_{z},V_{-1}\right]&=-\hbar V_{-1}\\[2ex]\left[J_{+},V_{+1}\right]&=0\\[1ex]\left[J_{+},V_{0}\right]&={\sqrt {2}}\hbar V_{+1}\\[1ex]\left[J_{+},V_{-1}\right]&={\sqrt {2}}\hbar V_{0}\\[2ex]\left[J_{-},V_{+1}\right]&={\sqrt {2}}\hbar V_{0}\\[1ex]\left[J_{-},V_{0}\right]&={\sqrt {2}}\hbar V_{-1}\\[1ex]\left[J_{-},V_{-1}\right]&=0\\[1ex]\end{aligned}}}$$

which are of similar form of

$${\displaystyle {\begin{aligned}J_{z}|1,+1\rangle &=+\hbar |1,+1\rangle \\[1ex]J_{z}|1,0\rangle &=0|1,0\rangle \\[1ex]J_{z}|1,-1\rangle &=-\hbar |1,-1\rangle \\[2ex]J_{+}|1,+1\rangle &=0\\[1ex]J_{+}|1,0\rangle &={\sqrt {2}}\hbar |1,+1\rangle \\[1ex]J_{+}|1,-1\rangle &={\sqrt {2}}\hbar |1,0\rangle \\[2ex]J_{-}|1,+1\rangle &={\sqrt {2}}\hbar |1,0\rangle \\[1ex]J_{-}|1,0\rangle &={\sqrt {2}}\hbar |1,-1\rangle \\[1ex]J_{-}|1,-1\rangle &=0\\[1ex]\end{aligned}}}$$

In the spherical basis, the generators of rotation are:

$${\displaystyle J_{\pm 1}=\mp {\frac {1}{\sqrt {2}}}J_{\pm }\,,\quad J_{0}=J_{z}}$$

From the transformation of operators and Baker Hausdorff lemma:

${\displaystyle {U(R)}^{\dagger }{\widehat {V}}_{q}U(R)={\widehat {V}}_{q}+i{\frac {\theta }{\hbar }}\left[{\hat {n}}\cdot {\vec {J}},{\widehat {V}}_{q}\right]+\sum _{k=2}^{\infty }{\frac {\left(i{\frac {\theta }{\hbar }}[{\hat {n}}\cdot {\vec {J}},.]\right)^{k}}{k!}}{\widehat {V}}_{q}=exp\left({i{\frac {\theta }{\hbar }}{\hat {n}}\cdot Ad_{\vec {J}}}\right){\widehat {V}}_{q}}$

compared to

${\displaystyle U(R)|j,k\rangle =|j,k\rangle -i{\frac {\theta }{\hbar }}{\hat {n}}\cdot {\vec {J}}|j,k\rangle +\sum _{k=2}^{\infty }{\frac {\left(-i{\frac {\theta }{\hbar }}{\hat {n}}\cdot {\vec {J}}\right)^{k}}{k!}}|j,k\rangle =exp\left({-i{\frac {\theta }{\hbar }}{\hat {n}}\cdot {\vec {J}}}\right)|j,k\rangle }$

it can be argued that the commutator with operator replaces the action of operator on state for transformations of operators as compared with that of states:

${\displaystyle U(R)|j,k\rangle =exp\left({-i{\frac {\theta }{\hbar }}{\hat {n}}\cdot {\vec {J}}}\right)|j,k\rangle =\sum _{j',k'}|j',k'\rangle \langle j',k'|exp\left({-i{\frac {\theta }{\hbar }}{\hat {n}}\cdot {\vec {J}}}\right)|j,k\rangle =\sum _{m'}D_{k'k}^{(j)}(R)|j,k'\rangle }$

The rotation transformation in the spherical basis (originally written in the Cartesian basis) is then, due to similarity of commutation and operator shown above:

$${\displaystyle {U(R)}^{\dagger }{\widehat {V}}_{q}U(R)=\sum _{q'}{{D_{q'q}^{(1)}}(R^{-1})}{\widehat {V}}_{q'}}$$

One can generalize the vector operator concept easily to tensorial operators, shown next.

In general, a tensor operator is one that transforms according to a tensor:

$${\displaystyle U(R)^{\dagger }{\widehat {T}}_{pqr\cdots }^{abc\cdots }U(R)=R_{p,\alpha }R_{q,\beta }R_{r,\gamma }\cdots {\widehat {T}}_{ijk\cdots }^{\alpha \beta \gamma \cdots }R_{i,a}^{-1}R_{j,b}^{-1}R_{k,c}^{-1}\cdots }$$

where the basis are transformed by ${\displaystyle R^{-1}}$ or the vector components transform by ${\displaystyle R}$.

In the subsequent discussion surrounding tensor operators, the index notation regarding covariant/contravariant behavior is ignored entirely. Instead, contravariant components is implied by context. Hence for an n times contravariant tensor:[2]

$${\displaystyle U(R)^{\dagger }{\widehat {T}}_{pqr\cdots }U(R)=R_{pi}R_{qj}R_{rk}\cdots {\widehat {T}}_{ijk\cdots }}$$

• The Quadrupole moment operator,
  $${\displaystyle Q_{ij}=\sum _{\alpha }q_{\alpha }(3r_{\alpha i}r_{\alpha j}-r_{\alpha }^{2}\delta _{ij})}$$

  
• Components of two tensor vector operators can be multiplied to give another Tensor operator.
  $${\displaystyle T_{ij}=V_{i}W_{j}}$$

  
  In general, n number of tensor operators will also give another tensor operator
  $${\displaystyle T_{pqr\cdots k}=V_{p}^{(1)}V_{q}^{(2)}V_{r}^{3)}\cdots V_{k}^{(n)}}$$

  
  or,
  $${\displaystyle T_{i_{1}i_{2}\cdots j_{1}j_{2}\cdots }=V_{i_{1}i_{2}\cdots }W_{j_{1}j_{2}\cdots }}$$

  

Note: In general, a tensor operator cannot be written as the tensor product of other tensor operators as given in the above example.

If ${\displaystyle {\vec {V}}}$ and ${\displaystyle {\vec {W}}}$ are two three dimensional vector operators, then a rank 2 Cartesian dyadic tensors can be formed from nine operators of form ${\displaystyle {\hat {T}}_{ij}={\hat {V_{i}}}{\hat {W_{j}}}}$,

$${\displaystyle {U(R)}^{\dagger }{\hat {T}}_{ij}U(R)={U(R)}^{\dagger }({\hat {V_{i}}}{\hat {W_{j}}})U(R)=({U(R)}^{\dagger }{\hat {V}}_{i}U(R))({U(R)}^{\dagger }{\hat {W}}_{j}U(R))=\left(\sum _{l=1}^{3}R_{il}{\hat {V}}_{l}\cdot \sum _{k=1}^{3}R_{jk}{\hat {W}}_{k}\right)}$$

Rearranging terms, we get:

$${\displaystyle {U(R)}^{\dagger }{\hat {T}}_{ij}U(R)=\sum _{k=1}^{3}\sum _{l=1}^{3}\left(R_{il}R_{jk}{\hat {T}}_{lk}\right)}$$

The RHS of the equation is change of basis equation for twice contravariant tensors where the basis are transformed by ${\displaystyle R^{-1}}$ or the vector components transform by ${\displaystyle R}$ which matches transformation of vector operator components. Hence the operator tensor described forms a rank 2 tensor, in tensor representation,

$${\displaystyle {\hat {\mathbf {T} }}={\vec {V}}\otimes {\vec {W}}=({\hat {V}}_{i}{\hat {W}}_{j})(\mathbf {e} _{i}\otimes \mathbf {e} _{j})}$$

Similarly, an n-times contravariant tensor operator can be formed similarly by n vector operators.

We observe that the subspace spanned by linear combinations of the rank two tensor components form an invariant subspace, ie. the subspace does not change under rotation since the transformed components itself is a linear combination of the tensor components. However, this subspace is not irreducible ie. it can be further divided into invariant subspaces under rotation. Otherwise, the subspace is called reducible. In other words, there exists specific sets of different linear combinations of the components such that they transforms into a linear combination of the same set under rotation.[3] In the above example, we will show that the 9 independent tensor components can be divided into a set of 1, 3 and 5 combination of operators that each form irreducible invariant subspaces.

The subspace spanned by ${\displaystyle \{{\hat {T}}_{ij}\}}$ can be divided two subspaces; three independent antisymmetric components ${\displaystyle \{{\hat {A}}_{ij}\}}$ and six independent symmetric component ${\displaystyle \{{\hat {S}}_{ij}\}}$, defined as ${\displaystyle {\hat {A}}_{ij}={\frac {1}{2}}({\hat {T}}_{ij}-{\hat {T}}_{ji})}$ and ${\displaystyle {\hat {S}}_{ij}={\frac {1}{2}}({\hat {T}}_{ij}+{\hat {T}}_{ji})}$. Using the ${\displaystyle \{{\hat {T}}_{ij}\}}$ transformation under rotation formula, it can be shown that both ${\displaystyle \{{\hat {A}}_{ij}\}}$ and ${\displaystyle \{{\hat {S}}_{ij}\}}$ are transformed into a linear combination of members of its own sets. Although ${\displaystyle \{{\hat {A}}_{ij}\}}$ is irreducible, the same cannot be said about ${\displaystyle \{{\hat {S}}_{ij}\}}$.

The six independent symmetric component set can be divided into five independent traceless symmetric component and the invariant trace can be its own subspace.

Hence, the invariant subspaces of ${\displaystyle \{{\hat {T}}_{ij}\}}$ are formed respectively by:

1. One invariant trace of the tensor, ${\displaystyle {\hat {t}}=\sum _{k=1}^{3}{\hat {T}}_{kk}}$
2. Three linearly independent antisymmetric components from: ${\displaystyle {\hat {A}}_{ij}={\frac {1}{2}}({\hat {T}}_{ij}-{\hat {T}}_{ji})}$
3. Five linearly independent traceless symmetric components from ${\displaystyle {\hat {S}}_{ij}={\frac {1}{2}}({\hat {T}}_{ij}+{\hat {T}}_{ji})-{\frac {1}{3}}{\hat {t}}\delta _{ij}}$

If ${\displaystyle {\hat {T}}_{ij}={\hat {V_{i}}}{\hat {W_{j}}}}$, the invariant subspaces of ${\displaystyle \{{\hat {T}}_{ij}\}}$ formed are represented by:[4]

1. One invariant scalar operator ${\displaystyle {\vec {V}}\cdot {\vec {W}}}$
2. Three linearly independent components from ${\displaystyle {\frac {1}{2}}({\hat {V}}_{i}{\hat {W}}_{j}-{\hat {V}}_{j}{\hat {W}}_{i})}$
3. Five linearly independent components from ${\displaystyle {\frac {1}{2}}({\hat {V}}_{i}{\hat {W}}_{j}+{\hat {V}}_{j}{\hat {W}}_{i})-{\frac {1}{3}}({\vec {V}}\cdot {\vec {W}})\delta _{ij}}$

From the above examples, the nine component ${\displaystyle \{{\hat {T}}_{ij}\}}$ are split into subspaces formed by one, three and five components. These numbers add up to the number of components of the original tensor in a manner similar to the dimension of vector subspaces adding to the dimension of the space that is a direct sum of these subspaces. Similarly, every element of ${\displaystyle \{{\hat {T}}_{ij}\}}$ can be expressed in terms of a linear combination of components from its invariant subspaces:

${\displaystyle {\hat {T}}_{ij}={\frac {1}{3}}{\hat {t}}\delta _{ij}+{\hat {A}}_{ij}+{\hat {S}}_{ij}}$

or

${\displaystyle {\hat {T}}_{ij}={\frac {1}{3}}({\vec {V}}\cdot {\vec {W}})\delta _{ij}+\left({\frac {1}{2}}({\hat {V}}_{i}{\hat {W}}_{j}-{\hat {V}}_{j}{\hat {W}}_{i})\right)+\left({\frac {1}{2}}({\hat {V}}_{i}{\hat {W}}_{j}+{\hat {V}}_{j}{\hat {W}}_{i})-{\frac {1}{3}}({\vec {V}}\cdot {\vec {W}})\delta _{ij}\right)=\mathbf {T} ^{(0)}+\mathbf {T} ^{(1)}+\mathbf {T} ^{(2)}}$

where:

$${\displaystyle {\widehat {T}}_{ij}^{(0)}={\frac {{\widehat {V}}_{k}{\widehat {W}}_{k}}{3}}\delta _{ij}}$$

$${\displaystyle {\widehat {T}}_{ij}^{(1)}={\frac {1}{2}}\left[{\widehat {V}}_{i}{\widehat {W}}_{j}-{\widehat {V}}_{j}{\widehat {W}}_{i}\right]={\widehat {V}}_{[i}{\widehat {W}}_{j]}}$$

$${\displaystyle {\widehat {T}}_{ij}^{(2)}={\tfrac {1}{2}}\left({\widehat {V}}_{i}{\widehat {W}}_{j}+{\widehat {V}}_{j}{\widehat {W}}_{i}\right)-{\tfrac {1}{3}}{\widehat {V}}_{k}{\widehat {W}}_{k}\delta _{ij}={\widehat {V}}_{(i}{\widehat {W}}_{j)}-T_{ij}^{(0)}}$$

In general cartesian tensors of rank greater than 1 are reducible. In quantum mechanics, this particular example bears resemblance to the addition of two spin one particles where both are 3 dimensional, hence the total space being 9 dimensional, can be formed by spin 0, spin 1 and spin 2 systems each having 1 dimensional, 3 dimensional and 5 dimensional space respectively.[4] These three terms are irreducible, which means they cannot be decomposed further and still be tensors satisfying the defining transformation laws under which they must be invariant. Each of the irreducible representations T⁽⁰⁾, T⁽¹⁾, T⁽²⁾ ... transform like angular momentum eigenstates according to the number of independent components.

It is possible that a given tensor may have one or more of these components vanish. For example, the quadrupole moment tensor is already symmetric and traceless, and hence has only 5 independent components to begin with.[3]

Spherical tensor operators are generally defined as operators with the following transformation rule, under rotation of coordinate system:

${\displaystyle {\widehat {T}}_{m}^{(j)}\rightarrow U(R)^{\dagger }{\widehat {T}}_{m}^{(j)}U(R)=\sum _{m'}D_{m'm}^{(j)}(R^{-1}){\widehat {T}}_{m'}^{(j)}}$

The commutation relations can be found by expanding LHS and RHS as:[4]

${\displaystyle U(R)^{\dagger }{\widehat {T}}_{m}^{(j)}U(R)=\left(1+{\frac {i\epsilon {\hat {n}}\cdot {\vec {J}}}{\hbar }}+{\mathcal {O}}(\epsilon ^{2})\right){\widehat {T}}_{m}^{(j)}\left(1-{\frac {i\epsilon {\hat {n}}\cdot {\vec {J}}}{\hbar }}+{\mathcal {O}}(\epsilon ^{2})\right)=\sum _{m'}\langle j,m'|\left(1+{\frac {i\epsilon {\hat {n}}\cdot {\vec {J}}}{\hbar }}+{\mathcal {O}}(\epsilon ^{2})\right)|j,m\rangle {\widehat {T}}_{m'}^{(j)}}$

Simplifying and applying limits to select only first order terms, we get:

${\displaystyle {[{\hat {n}}\cdot {\vec {J}}},{\widehat {T}}_{m}^{(j)}]=\sum _{m'}{\widehat {T}}_{m'}^{(j)}\langle j,m'|{\vec {J}}\cdot {\hat {n}}|j,m\rangle }$

For choices of ${\displaystyle {\hat {n}}={\hat {x}}\pm i{\hat {y}}}$ or ${\displaystyle {\hat {n}}={\hat {z}}}$, we get:

$${\displaystyle {\begin{aligned}\left[J_{\pm },{\widehat {T}}_{m}^{(j)}\right]&=\hbar {\sqrt {(j\mp m)(j\pm m+1)}}{\widehat {T}}_{m\pm 1}^{(j)}\\[1ex]\left[J_{z},{\widehat {T}}_{m}^{(j)}\right]&=\hbar m{\widehat {T}}_{m}^{(j)}\end{aligned}}}$$

Note the similarity of the above to:

$${\displaystyle {\begin{aligned}J_{\pm }|j,m\rangle &=\hbar {\sqrt {(j\mp m)(j\pm m+1)}}|j,m\pm 1\rangle \\[1ex]J_{z}|j,m\rangle &=\hbar m|j,m\rangle \end{aligned}}}$$

Since ${\displaystyle J_{x}}$ and ${\displaystyle J_{y}}$ are linear combinations of ${\displaystyle J_{\pm }}$, they share the same similarity due to linearity.

If, only the commutation relations hold, using the following relation, ${\displaystyle |j,m\rangle \rightarrow U(R)|j,m\rangle =exp\left(-{i{\frac {\theta }{\hbar }}{\hat {n}}\cdot {\vec {J}}}\right)|j,m\rangle =\sum _{m'}D_{m'm}^{(j)}(R)|j,m'\rangle }$

we find due to similarity of actions of ${\displaystyle J}$ on wavefunction ${\displaystyle |j,m\rangle }$ and the commutation relations on ${\displaystyle {\widehat {T}}_{m}^{(j)}}$, that:

${\displaystyle {\widehat {T}}_{m}^{(j)}\rightarrow U(R)^{\dagger }{\widehat {T}}_{m}^{(j)}U(R)=exp\left({i{\frac {\theta }{\hbar }}{\hat {n}}\cdot ad_{\vec {J}}}\right){\widehat {T}}_{m}^{(j)}=\sum _{m'}D_{m'm}^{(j)}(R^{-1}){\widehat {T}}_{m'}^{(j)}}$

where the exponential form is given by Baker–Hausdorff lemma. Hence, the above commutation relations and the transformation property are equivalent definitions of spherical tensor operators. It can also be shown that ${\displaystyle \{ad_{{\hat {J}}_{i}}\}}$ transform like a vector due to their commutation relation.

In the following section, construction of spherical tensors will be discussed. For example, since example of spherical vector operators is shown, it can be used to construct higher order spherical tensor operators. In general, spherical tensor operators can be constructed from two perspectives.[5] One way is to specify how spherical tensors transform under a physical rotation - a group theoretical definition. A rotated angular momentum eigenstate can be decomposed into a linear combination of the initial eigenstates: the coefficients in the linear combination consist of Wigner rotation matrix entries. Or by continuing the previous example of the second order dyadic tensor T = a ⊗ b, casting each of a and b into the spherical basis and substituting into T gives the spherical tensor operators of the second order.

Combination of two spherical tensors ${\displaystyle A_{q_{1}}^{(k_{1})}}$ and ${\displaystyle B_{q_{2}}^{(k_{2})}}$in the following manner involving the Clebsch–Gordan coefficients can be proved to give another spherical tensor of the form:[4]

$${\displaystyle T_{q}^{(k)}=\sum _{q_{1},q_{2}}\langle k_{1},k_{2};q_{1},q_{2}|k_{1},k_{2};k,q\rangle A_{q_{1}}^{(k_{1})}B_{q_{2}}^{(k_{2})}}$$

This equation can be used to construct higher order spherical tensor operators, for example, second order spherical tensor operators using two first order spherical tensor operators, say A and B, discussed previously:

$${\displaystyle {\begin{aligned}{\widehat {T}}_{\pm 2}^{(2)}&={\widehat {a}}_{\pm 1}{\widehat {b}}_{\pm 1}\\[1ex]{\widehat {T}}_{\pm 1}^{(2)}&={\tfrac {1}{\sqrt {2}}}\left({\widehat {a}}_{\pm 1}{\widehat {b}}_{0}+{\widehat {a}}_{0}{\widehat {b}}_{\pm 1}\right)\\[1ex]{\widehat {T}}_{0}^{(2)}&={\tfrac {1}{\sqrt {6}}}\left({\widehat {a}}_{+1}{\widehat {b}}_{-1}+{\widehat {a}}_{-1}{\widehat {b}}_{+1}+2{\widehat {a}}_{0}{\widehat {b}}_{0}\right)\end{aligned}}}$$

Using the infinitesimal rotation operator and its Hermitian conjugate, one can derive the commutation relation in the spherical basis:

$${\displaystyle \left[J_{a},{\widehat {T}}_{q}^{(2)}\right]=\sum _{q'}{D(J_{a})}_{qq'}^{(2)}{\widehat {T}}_{q'}^{(2)}=\sum _{q'}\langle j{=}2,m{=}q|J_{a}|j{=}2,m{=}q'\rangle {\widehat {T}}_{q'}^{(2)}}$$

and the finite rotation transformation in the spherical basis can be verified:

$${\displaystyle {U(R)}^{\dagger }{\widehat {T}}_{q}^{(2)}U(R)=\sum _{q'}{{D(R)}_{qq'}^{(2)}}^{*}{\widehat {T}}_{q'}^{(2)}}$$

Define an operator by its spectrum:

$${\displaystyle \Upsilon _{l}^{m}|r\rangle =r^{l}Y_{l}^{m}(\theta ,\phi )|r\rangle =\Upsilon _{l}^{m}({\vec {r}})|r\rangle }$$

Since for spherical harmonics under rotation:

$${\displaystyle Y_{\ell =k}^{m=q}(\mathbf {n} )=\langle \mathbf {n} |k,q\rangle \rightarrow U(R)^{\dagger }Y_{\ell =k}^{m=q}(\mathbf {n} )U(R)=Y_{\ell =k}^{m=q}(R\mathbf {n} )=\langle \mathbf {n} |D(R)^{\dagger }|k,q\rangle =\sum _{q'}D_{q',q}^{(k)}(R^{-1})Y_{\ell =k}^{m=q'}(\mathbf {n} )}$$

It can also been shown that:

$${\displaystyle \Upsilon _{l}^{m}({\vec {r}})\rightarrow U(R)^{\dagger }\Upsilon _{l}^{m}({\vec {r}})U(R)=\sum _{m'}D_{m',m}^{(l)}(R^{-1})\Upsilon _{l}^{m'}({\vec {r}})}$$

Then ${\displaystyle \Upsilon _{l}^{m}({\vec {V}})}$, where ${\displaystyle {\vec {V}}}$ is a vector operator, also transforms in the same manner ie, is a spherical tensor operator. The process involves expressing ${\displaystyle \Upsilon _{l}^{m}({\vec {r}})=r^{l}Y_{l}^{m}(\theta ,\phi )=\Upsilon _{l}^{m}(x,y,z)}$ in terms of x, y and z and replacing x, y and z with operators V_x V_y and V_z which from vector operator. The resultant operator is hence a spherical tensor operator ${\displaystyle {\hat {T}}_{m}^{(l)}}$.^ This may include constant due to normalization from spherical harmonics which is meaningless in context of operators. The Hermitian adjoint of a spherical tensor may be defined as

$${\displaystyle (T^{\dagger })_{q}^{(k)}=(-1)^{k-q}(T_{-q}^{(k)})^{\dagger }.}$$

There is some arbitrariness in the choice of the phase factor: any factor containing (−1)^±q will satisfy the commutation relations.[6] The above choice of phase has the advantages of being real and that the tensor product of two commuting Hermitian operators is still Hermitian.[7] Some authors define it with a different sign on q, without the k, or use only the floor of k.[8]

Orbital angular momentum operators have the ladder operators:

$${\displaystyle L_{\pm }=L_{x}\pm iL_{y}}$$

which raise or lower the orbital magnetic quantum number m_ℓ by one unit. This has almost exactly the same form as the spherical basis, aside from constant multiplicative factors.

Spherical tensors can also be formed from algebraic combinations of the spin operators S_x, S_y, S_z, as matrices, for a spin system with total quantum number j = ℓ + s (and ℓ = 0). Spin operators have the ladder operators:

$${\displaystyle S_{\pm }=S_{x}\pm iS_{y}}$$

which raise or lower the spin magnetic quantum number m_s by one unit.

The transition amplitude is proportional to matrix elements of the dipole operator between the initial and final states. We use an electrostatic, spinless model for the atom and we consider the transition from the initial energy level E_nℓ to final level E_n′ℓ′. These levels are degenerate, since the energy does not depend on the magnetic quantum number m or m′. The wave functions have the form,

$${\displaystyle \psi _{n\ell m}(r,\theta ,\phi )=R_{n\ell }(r)Y_{\ell m}(\theta ,\phi )}$$

The dipole operator is proportional to the position operator of the electron, so we must evaluate matrix elements of the form,

$${\displaystyle \langle n'\ell 'm'|\mathbf {r} |n\ell m\rangle }$$

where, the initial state is on the right and the final one on the left. The position operator r has three components, and the initial and final levels consist of 2ℓ + 1 and 2ℓ′ + 1 degenerate states, respectively. Therefore if we wish to evaluate the intensity of a spectral line as it would be observed, we really have to evaluate 3(2ℓ′+ 1)(2ℓ+ 1) matrix elements, for example, 3×3×5 = 45 in a 3d → 2p transition. This is actually an exaggeration, as we shall see, because many of the matrix elements vanish, but there are still many non-vanishing matrix elements to be calculated.

A great simplification can be achieved by expressing the components of r, not with respect to the Cartesian basis, but with respect to the spherical basis. First we define,

$${\displaystyle r_{q}={\hat {\mathbf {e} }}_{q}\cdot \mathbf {r} }$$

Next, by inspecting a table of the Y_ℓm′s, we find that for ℓ = 1 we have,