Shield

Greek soldiers of Greco-Persian Wars. Left: Greek slinger. Right: hoplites. Middle: hoplite's shield has a curtain which serves as a protection from arrows.

Size and weight varied greatly. Lightly armored warriors relying on speed and surprise would generally carry light shields (pelte) that were either small or thin. Heavy troops might be equipped with robust shields that could cover most of the body. Many had a strap called a guige that allowed them to be slung over the user's back when not in use or on horseback. During the 14th–13th century BC, the Sards or Shardana, working as mercenaries for the Egyptian pharaoh Ramses II, utilized either large or small round shields against the Hittites. The Mycenaean Greeks used two types of shields: the "figure-of-eight" shield and a rectangular "tower" shield. These shields were made primarily from a wicker frame and then reinforced with leather. Covering the body from head to foot, the figure-of-eight and tower shield offered most of the warrior's body a good deal of protection in hand-to-hand combat. The Ancient Greek hoplites used a round, bowl-shaped wooden shield that was reinforced with bronze and called an aspis. The aspis was also the longest-lasting and most famous and influential of all of the ancient Greek shields. The Spartans used the aspis to create the Greek phalanx formation.[2] Their shields offered protection not only for themselves but for their comrades to their left.[3]

Two wooden round shields survived at Thorsberg moor (3rd century AD)

Examples of Germanic wooden shields circa 350 BC – 500 AD survive from weapons sacrifices in Danish bogs.

The heavily armored Roman legionaries carried large shields (scuta) that could provide far more protection, but made swift movement a little more difficult. The scutum originally had an oval shape, but gradually the curved tops and sides were cut to produce the familiar rectangular shape most commonly seen in the early Imperial legions. Famously, the Romans used their shields to create a tortoise-like formation called a testudo in which entire groups of soldiers would be enclosed in an armoured box to provide protection against missiles. Many ancient shield designs featured incuts of one sort or another. This was done to accommodate the shaft of a spear, thus facilitating tactics requiring the soldiers to stand close together forming a wall of shields.

Soldiers of the Khmer Empire use round shields. Located at the Bayon temple(12th/13th century).

Shield bearer in the Croatian 18th century tournament Sinjska alka

Typical in the early European Middle Ages were round shields with light, non-splitting wood like linden, fir, alder, or poplar, usually reinforced with leather cover on one or both sides and occasionally metal rims, encircling a metal shield boss. These light shields suited a fighting style where each incoming blow is intercepted with the boss in order to deflect it. The Normans introduced the kite shield around the 10th century, which was rounded at the top and tapered at the bottom. This gave some protection to the user's legs, without adding too much to the total weight of the shield. The kite shield predominantly features enarmes, leather straps used to grip the shield tight to the arm. Used by foot and mounted troops alike, it gradually came to replace the round shield as the common choice until the end of the 12th century, when more efficient limb armour allowed the shields to grow shorter, and be entirely replaced by the 14th century.

As body armour improved, knight's shields became smaller, leading to the familiar heater shield style. Both kite and heater style shields were made of several layers of laminated wood,[4] with a gentle curve in cross section. The heater style inspired the shape of the symbolic heraldic shield that is still used today. Eventually, specialised shapes were developed such as the bouche, which had a lance rest cut into the upper corner of the lance side, to help guide it in combat or tournament. Free standing shields called pavises, which were propped up on stands, were used by medieval crossbowmen who needed protection while reloading.

In time, some armoured foot knights gave up shields entirely in favour of mobility and two-handed weapons. Other knights and common soldiers adopted the buckler, giving rise to the term "swashbuckler".[5] The buckler is a small round shield, typically between 8 and 16 inches (20–40 cm) in diameter. The buckler was one of very few types of shield that were usually made of metal. Small and light, the buckler was easily carried by being hung from a belt; it gave little protection from missiles and was reserved for hand-to-hand combat where it served both for protection and offence. The buckler's use began in the Middle Ages and continued well into the 16th century.

In Italy, the targa, parma, and rotella were used by common people, fencers and even knights. The development of plate armour made shields less and less common as it eliminated the need for a shield. Lightly armoured troops continued to use shields after men-at-arms and knights ceased to use them. Shields continued in use even after gunpowder powered weapons made them essentially obsolete on the battlefield. In the 18th century, the Scottish clans used a small, round targe that was partially effective against the firearms of the time, although it was arguably more often used against British infantry bayonets and cavalry swords in close-in fighting.

During the 19th century, non-industrial cultures with little access to guns were still using war shields. Zulu warriors carried large lightweight shields called Ishlangu made from a single ox hide supported by a wooden spine.[6] This was used in combination with a short spear (iklwa) and/or club. Other African shields include Glagwa from Cameroon or Nguba from Congo.

Ballistic shield, NIJ Level IIIA

U.S. Navy Special Warfare Combatant-craft Crewmen (SWCC) fire a gun shield-equipped Minigun

Shields for protection from armed attack are still used by many police forces around the world. These modern shields are usually intended for two broadly distinct purposes. The first type, riot shields, are used for riot control and can be made from metal or polymers such as polycarbonate Lexan or Makrolon or boPET Mylar. These typically offer protection from relatively large and low velocity projectiles, such as rocks and bottles, as well as blows from fists or clubs. Synthetic riot shields are normally transparent, allowing full use of the shield without obstructing vision. Similarly, metal riot shields often have a small window at eye level for this purpose. These riot shields are most commonly used to block and push back crowds when the users stand in a "wall" to block protesters, and to protect against shrapnel, projectiles like stones and bricks, molotov cocktails, and during hand-to-hand combat.

The second type of modern police shield is the bullet-resistant ballistic shield, also called tactical shield. These shields are typically manufactured from advanced synthetics such as Kevlar and are designed to be bulletproof, or at least bullet resistant. Two types of shields are available:

1. Light level IIIA shields are designed to stop pistol cartridges.
2. Heavy level III and IV shields are designed to stop rifle cartridges.

Tactical shields often have a firing port so that the officer holding the shield can fire a weapon while being protected by the shield, and they often have a bulletproof glass viewing port. They are typically employed by specialist police, such as SWAT teams in high risk entry and siege scenarios, such as hostage rescue and breaching gang compounds, as well as in antiterrorism operations.

Law enforcement shields often have a large signs stating "POLICE" (or the name of a force, such as "US MARSHALS") to indicate that the user is a law enforcement officer.