Pulse-amplitude modulation

Pulse-amplitude modulation (PAM) is a form of signal modulation where the message information is encoded in the amplitude of a series of signal pulses. It is an analog pulse modulation scheme in which the amplitudes of a train of carrier pulses are varied according to the sample value of the message signal. Demodulation is performed by detecting the amplitude level of the carrier at every single period.

Principle of PAM: (1) original signal, (2) PAM signal, (a) amplitude of signal, (b) time
Passband modulation
Analog modulation
Digital modulation
Hierarchical modulation
Spread spectrum
See also

Types

There are two types of pulse amplitude modulation:

  • In single polarity PAM, a suitable fixed DC bias is added to the signal to ensure that all the pulses are positive.
  • In double polarity PAM, the pulses are both positive and negative.

Pulse-amplitude modulation is widely used in modulating signal transmission of digital data, with non-baseband applications having been largely replaced by pulse-code modulation, and, more recently, by pulse-position modulation.

The number of possible pulse amplitudes in analog PAM is theoretically infinite. Digital PAM reduces the number of pulse amplitudes to some power of two. For example, in 4-level PAM there are possible discrete pulse amplitudes; in 8-level PAM there are possible discrete pulse amplitudes; and in 16-level PAM there are possible discrete pulse amplitudes.

Uses

Ethernet

Some versions of the Ethernet communication standard are an example of PAM usage. In particular, 100BASE-T4 and BroadR-Reach Ethernet standard use three-level PAM modulation (PAM-3), while 1000BASE-T Gigabit Ethernet uses five-level PAM-5 modulation[1][lower-alpha 1] and 10GBASE-T 10 Gigabit Ethernet uses a Tomlinson-Harashima precoded (THP) version of pulse-amplitude modulation with 16 discrete levels (PAM-16), encoded in a two-dimensional checkerboard pattern known as DSQ128. 25 Gigabit Ethernet and some copper variants of 100 Gigabit Ethernet and 200 Gigabit Ethernet use PAM-4 modulation.

USB

USB4 Version 2.0 uses PAM-3 signaling for USB4 80Gbps (USB4 Gen 4×2) and USB4 120Gbps (USB4 Gen 4 Asymmetric) transmitting 3 bits per 2 clock cycles.[2] Thunderbolt 5 uses the same PHY.[3]

GDDR6X

GDDR6X, developed by Micron[4] and Nvidia and first used in the Nvidia RTX 3080 and 3090 graphics cards, uses PAM-4 signaling to transmit 2 bits per clock cycle without having to resort to higher frequencies or two channels or lanes with associated transmitters and receivers, which may increase power or space consumption and cost. Higher frequencies require higher bandwidth, which is a significant problem beyond 28 GHz when trying to transmit through copper. PAM-4 costs more to implement than earlier NRZ (non return to zero, PAM-2) coding partly because it requires more space in integrated circuits, and is more susceptible to SNR (signal to noise ratio) problems.[5][6]

GDDR7

GDDR7 will utilize PAM-3 signaling to achieve speeds of 36 Gbps/pin. The higher data transmission rate per cycle compared to NRZ/PAM-2-signaling used by GDDR6 and prior generations improves power efficiency and signal integrity.[7]

PCI Express

PCI Express 6.0 has introduced PAM-4 usage.[8]

Photo biology

The concept is also used for the study of photosynthesis using a specialized instrument that involves a spectrofluorometric measurement of the kinetics of fluorescence rise and decay in the light-harvesting antenna of thylakoid membranes, thus querying various aspects of the state of the photosystems under different environmental conditions.[9] Unlike the traditional dark-adapted chlorophyll fluorescence measurements, pulse amplitude fluorescence devices allow measuring under ambient light conditions, which made measurements significantly more versatile.[10]

Electronic drivers for LED lighting

Pulse-amplitude modulation has also been developed for the control of light-emitting diodes (LEDs), especially for lighting applications.[11] LED drivers based on the PAM technique offer improved energy efficiency over systems based upon other common driver modulation techniques such as pulse-width modulation (PWM) as the forward current passing through an LED is relative to the intensity of the light output and the LED efficiency increases as the forward current is reduced.

Pulse-amplitude modulation LED drivers are able to synchronize pulses across multiple LED channels to enable perfect color matching. Due to the inherent nature of PAM in conjunction with the rapid switching speed of LEDs, it is possible to use LED lighting as a means of wireless data transmission at high speed.

Digital television

The North American Advanced Television Systems Committee standards for digital television uses a form of PAM to broadcast the data that makes up the television signal. This system, known as 8VSB, is based on an eight-level PAM.[12] It uses additional processing to suppress one sideband and thus make more efficient use of limited bandwidth. Using a single 6 MHz channel allocation, as defined in the previous NTSC analog standard, 8VSB is capable of transmitting 32 Mbit/s. After accounting for error-correcting codes and other overhead, the data rate in the signal is 19.39 Mbit/s.

See also
Wikimedia Commons has media related to Pulse amplitude modulation.

Notes
  1. The first use of PAM-5 in Ethernet was in 100BASE-T2. Although not widely adopted, the technology developed for 100BASE-T2 was subsequently used in the popular 1000BASE-T Gigabit Ethernet standard.

References
  1. George Schroeder (2003-04-01). "What PAM5 means to you". EDN. Retrieved 2022-02-16.
  2. GraniteRiverLabs, Team (2023-01-17). "Welcome to the 80Gpbs Ultra-High Speed Era of USB4 | GraniteRiverLabs Taiwan". www.graniteriverlabs.com. Archived from the original on 2023-02-21. Retrieved 2023-02-21.
  3. Ian Cutress (2021-08-01). "Intel Executive Posts Thunderbolt 5 Photo then Deletes It: 80 Gbps and PAM-3". AnandTech.
  4. "Doubling I/O Performance with PAM4 - Micron Innovates GDDR6X to Accelerate Graphics Memory". Micron. Retrieved 11 September 2020.
  5. Smith, Ryan. "Micron Spills on GDDR6X: PAM4 Signaling For Higher Rates, Coming to NVIDIA's RTX 3090". AnandTech.com.
  6. Maliniak, David (January 14, 2016). "EDN - The fundamentals of PAM4".
  7. Anton Shilov (2023-03-08). "Cadence Delivers Technical Details on GDDR7: 36 Gbps with PAM3 Encoding". AnandTech.
  8. Smith, Ryan. "PCI Express Bandwidth to Be Doubled Again: PCIe 6.0 Announced, Spec to Land in 2021". www.anandtech.com.
  9. Schreiber, Ulrich (2004). "Pulse-Amplitude-Modulation (PAM) Fluorometry and Saturation Pulse Method: An Overview". Chlorophyll a Fluorescence. Advances in Photosynthesis and Respiration. Vol. 19. Dordrecht: Springer Netherlands. pp. 279–319. doi:10.1007/978-1-4020-3218-9_11. ISBN 978-1-4020-3217-2.
  10. "5.1 Chlorophyll fluorescence – ClimEx Handbook". Retrieved 2020-01-14.
  11. Whitaker, Tim (January 2006). "Closed-Loop Electronic Controllers Drive LED Systems". LEDs. Retrieved 2020-10-29.
  12. Sparano, David (1997). "WHAT EXACTLY IS 8-VSB ANYWAY?" (PDF). Retrieved 8 Nov 2012.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.