Motor 250/400

The Motor 250/400 is the first functional diesel engine. It was designed by Rudolf Diesel, and drawn by Imanuel Lauster. The workshop of the Maschinenfabrik Augsburg built two units, the A-Motor, and the B-Motor. The latter has been on static display at the Deutsches Museum in Munich since testing it came to an end. Throughout the late 1890s, several licensed copies of the Motor 250/400 were made. Most of these copies were very unreliable, which almost caused the diesel engine's demise.

Motor 250/400
B-Motor at the Deutsches Museum
Overview
ManufacturerMaschinenfabrik Augsburg
Designer
Production30 April 1896 – 6 October 1896
Layout
ConfigurationSingle-cylinder A-type, crosshead piston
Displacement19,635 cm3 (1,198.2 in3)
Cylinder bore250 mm (9.84 in)
Piston stroke400 mm (15.75 in)
Cylinder block materialGrey cast iron
Cylinder head materialGrey cast iron
ValvetrainOHC, 2 valves
Combustion
Operating principleDiesel
SuperchargerPiston-type supercharger + intercooler (until 28 January 1897)
None (from 28 January 1897)
Fuel systemAir-blast injection
Fuel typeKerosine
Petrol
Ligroin
Coal-tar creosote oil
Paraffin oil
Gas oil
Fuel oil
Solar oil
Naphtha
Benzene
Shale oil
Peanut oil
Mains gas
Oil systemManual
Cooling systemWater-cooled
Output
Power output13.1 kW (17.8 PS) at 154/min
Torque output812 N⋅m (82.8 kp⋅m) at 154/min
Dimensions
Diameter3,000 mm (120 in) (flywheel)
Chronology
PredecessorMotor 220/400

History

Development

In early 1893, Rudolf Diesel had contracted with both Maschinenfabrik Augsburg and Krupp in Essen to develop an engine based on his essay Theory and Construction of a Rational Heat Motor. However, by mid-1893 Diesel had realised that the rational heat motor would not work, and he modified his design. This modified design would later be known as the diesel engine. The first prototype, Motor 150/400, was completed on 12 July 1893.[1] Initial tests with it proved the concept, and by October 1895, after the first prototype had been converted into the second prototype Motor 220/400, it had become clear that, a completely new engine had to be designed from scratch.[2] On 20 February 1896, Krupp, Maschinenfabrik Augsburg, and Diesel decided to start the development of the new engine. The new engine was supposed to be a 250 mm bore engine with a 400 mm stroke.[3] On 5 March 1896, Diesel filed a patent application for supercharging combined with intercooling; on 26 March, it was decided to build the new engine with a supercharger.[4]

In order to improve the efficiency of the development process, a new design bureau was built directly into Diesel's Augsburg testing laboratory. Several young engineers worked there, including Imanuel Lauster,[3][5] who drew the Motor 250/400.[6] Friedrich Sass writes that Lauster did most of the drawing work himself, but considers that Diesel's assistant Nadrowski might have assisted Lauster.[5] On 30 April 1896, after Lauster had completed the drawings, the workshop at Augsburg began making parts for the engine.[7]

Building and post-design phase

The cylinder casting worked without any problems, and the first cylinder cast was used.[7] On 25 July 1896, it was pressure-tested with water at a pressure of 80 atm (8.1 MPa); only few leaks were found. The cylinder head however was difficult to make, therefore, two were cast for testing purposes – both proved to be porous at a water pressure of 50 atm (5.1 MPa) and thus unusable. Lauster and the casting foreman at Maschinenfabrik Augsburg had to redesign the cylinder head several times; in total, five units had to be made.[8] by 6 October 1896, the first engine was completed and ready for testing.[9] In December 1896, Lauster was given a pay rise and a bonus of 3,000 mark for designing the Motor 250/400; the final modifications to the engine were made in early January 1897.[10]

Post-completion phase
A copy of the Motor 250/400 built by Langen & Wolf in Wien under licence, 1898

On 17 February 1897, Moritz Schröter conducted the engine's official test. The engine proved successful,[11] even though the fuel system was unreliable. Schröter's test though convinced engineers and industrialists alike that, the engine was ready for series production.[12] Schröter concluded "that we are beholding a quite marketable machine that has been thoroughly designed with great attention to every single detail."[13] At this time, several firms bought licences for building legal copies of the Motor 250/400.[14] It was believed that copies of the engine would work well without any issues, because the Motor 250/400 at Augsburg worked perfectly due to the extensive care and maintenance it received.[15]

In summer of 1898, Paul Meyer and Ludwig Noé, who worked for Diesel, designed the "Kollektiv-Ausstellung von Dieselmotoren" (collective exhibition of diesel engines) in a wooden shack on the former Coal Island in München.[16] It was planned to exhibit five copies of the Motor 250/400 built by several licensees, but only four were completed in time. The completion of these engines was rushed, and the first runs of these engines were only conducted after they had been installed at the exhibition.[17] Several problems arose, most notably, loud banging at engine startup.[16]

Soon after the exhibition, other copies of the Motor 250/400 built by licensees began failing.[18] Unlike the Motor A and B, these copies were treated like steam engines of the time and often overloaded, which caused piston and fuel injector defects among other problems. A significant safety problem was the air-blast pump which was prone to exploding due to compression ignition of its lubrication oil. The fuel injector was unreliable due to its atomiser's fragile brass gauze; improperly wound gauzes resulted in a sooty exhaust and power loss. Friedrich Sass argues that a lack of experience with the diesel engine caused these failures, and that they almost resulted in the diesel engine's demise.[19] However, Sass also describes that an engine installed by Noé at Aktie-Bolag Diesels Motorer in Stockholm worked without major problems from 1900. Burmeister & Wain in København finally redesigned the fuel injector's atomiser, which solved one of the engine's major problems.[20]

Technical description
The dual rod and lever mechanism that actuates the engine's air-blast pump is well-visible in this picture

The Motor 250/400 is a water-cooled, single-cylinder, A-type (crankcase-less) engine with a crosshead piston. It is a low-speed, four-stroke diesel engine with a rated engine speed of 160/min. With a cylinder bore of 250 mm and a piston stroke of 400 mm, it displaces about 19.6 litres. Although designed and built as a double-acting piston engine with the underside of the piston acting as a supercharging pump,[21] the engine was run naturally aspirated from 28 January 1897, because of efficiency losses caused by incomplete expansion.[22] Helmut Pucher (2012) argues that the volume of the compressed air cylinder that the supercharging pump fed its air into was too small, and that Diesel should have designed the engine with more supercharging pump valve clearance.[23] Pucher also describes that Diesel considered using an intercooler for the engine.[24]

The engine's cylinder is made of grey cast iron and has a cooling jacket, the crossflow cylinder head is also made of cast iron. The combustion chamber is located in between the piston and the cylinder head, the fuel is directly injected into it with air-blast injection, an early form of direct injection. Thus, the engine has a fuel injector, which is built into the centre of the cylinder head, in between the intake and exhaust valves. The engine was fitted with two separate valves, an inlet valve, and an outlet valve. Unlike its predecessor, it had separate intake and exhaust ports. The piston is made of iron, hollow, and water-cooled; it has four compression rings.[25] The crankpin is also water-cooled.[8]

The fuel pump is mounted above the cylinder head and driven by the camshaft,[21] the air-blast pump is cast onto the cylinder and driven via a lever by two connecting rods from the engine's piston rod.[26] Like all air-blast injected diesel engines, the Motor 250/400 has a compressed gas bottle for the injection air. It is made of welded steel, and also used for starting the engine (compressed air starting). For safety reasons, the engine was fitted with several safety valves,[27] and had some of its tubes designed for gases filled with pebbles and wire wool.[28][8] The engine was designed for kerosine, but could also burn several other types of fuel, including petrol, oils, and mains gas.

Technical specifications and performance characteristics

The Motor 250/400 was tested extensively and eventually proved to be the most efficient engine of its time, reaching a thermal efficiency of more than 38 %. Out of the many tests, Moritz Schröter's test conducted on 17 February 1897 was the engine's official test;[11] the effective power was 17.8 PS (13.1 kW) at 154/min.[29] According to Diesel, the engine was designed with an indicated power of 20 PSi (14.7 kWi). It had rated speed of 160/min,[30] and could still operate normally at a speed of 40/min with a low load.[31]

Date of testing Tester Aspiration Load Thermal efficiency Mean effective pressure Power Fuel consumption Fuel type Source
12 January 1897 Diesel Supercharger set to 100% 100% 24% 9.2 kp/cm2 (0.9 MPa) >15 PS (11.0 kW) 396 g/PSh (538 g/kWh) Kerosine [32][10]
28 January 1897 Diesel Supercharger removed 100% 31.9% 8.0 kp/cm2 (0.8 MPa) 258 g/PSh (351 g/kWh) Kerosine [33][34]
28 January 1897 Diesel Supercharger removed 50% 38.4% 264 g/PSh (359 g/kWh) Kerosine [33]
1 February 1897 Dyckhoff Supercharger removed 100% 18.3 PS (13.5 kW) at 158/min 250 g/PSh (340 g/kWh) Kerosine [35]
1 February 1897 Dyckhoff Supercharger removed 100% 34–38% 234 g/PSh (318 g/kWh) Kerosine [36]
17 February 1897 Schröter Supercharger removed 100% 34.2% 17.8 PS (13.1 kW) at 154/min 238 g/PSh (324 g/kWh) Kerosine [37][29]
17 February 1897 Schröter Supercharger removed 50% 38.4% 277 g/PSh (377 g/kWh) Kerosine [37]
21 October 1897 Diesel Supercharger removed 100% 38.7% 211 g/PSh (287 g/kWh) Kerosine [38]

References
  1. Friedrich Sass: Geschichte des deutschen Verbrennungsmotorenbaus von 1860 bis 1918, Springer, Berlin/Heidelberg 1962, ISBN 978-3-662-11843-6. p. 435
  2. Rudolf Diesel: Die Entstehung des Dieselmotors. Springer, Berlin 1913. ISBN 978-3-642-64940-0, p. 49
  3. Rudolf Diesel: Die Entstehung des Dieselmotors. Springer, Berlin 1913. ISBN 978-3-642-64940-0, p. 52
  4. Friedrich Sass: Geschichte des deutschen Verbrennungsmotorenbaus von 1860 bis 1918, Springer, Berlin/Heidelberg 1962, ISBN 978-3-662-11843-6. p. 467
  5. Friedrich Sass: Geschichte des deutschen Verbrennungsmotorenbaus von 1860 bis 1918, Springer, Berlin/Heidelberg 1962, ISBN 978-3-662-11843-6. p. 468
  6. Günter Mau: Handbuch Dieselmotoren im Kraftwerks- und Schiffsbetrieb, Vieweg (Springer), Braunschweig/Wiesbaden 1984, ISBN 978-3-528-14889-8, p. 6
  7. Rudolf Diesel: Die Entstehung des Dieselmotors. Springer, Berlin 1913. ISBN 978-3-642-64940-0, p. 53
  8. Rudolf Diesel: Die Entstehung des Dieselmotors. Springer, Berlin 1913. ISBN 978-3-642-64940-0, p. 63
  9. Rudolf Diesel: Die Entstehung des Dieselmotors. Springer, Berlin 1913. ISBN 978-3-642-64940-0, p. 64
  10. Friedrich Sass: Geschichte des deutschen Verbrennungsmotorenbaus von 1860 bis 1918, Springer, Berlin/Heidelberg 1962, ISBN 978-3-662-11843-6. p. 475
  11. Friedrich Sass: Geschichte des deutschen Verbrennungsmotorenbaus von 1860 bis 1918, Springer, Berlin/Heidelberg 1962, ISBN 978-3-662-11843-6. p. 480
  12. Friedrich Sass: Geschichte des deutschen Verbrennungsmotorenbaus von 1860 bis 1918, Springer, Berlin/Heidelberg 1962, ISBN 978-3-662-11843-6. p. 444
  13. Friedrich Sass: Geschichte des deutschen Verbrennungsmotorenbaus von 1860 bis 1918, Springer, Berlin/Heidelberg 1962, ISBN 978-3-662-11843-6. p. 481: "daß wir es hier mit einer durchaus marktfähigen, in allen Einzelheiten vollkommen durchgearbeiteten Maschine zu tun haben"
  14. Friedrich Sass: Geschichte des deutschen Verbrennungsmotorenbaus von 1860 bis 1918, Springer, Berlin/Heidelberg 1962, ISBN 978-3-662-11843-6. p. 481
  15. Friedrich Sass: Geschichte des deutschen Verbrennungsmotorenbaus von 1860 bis 1918, Springer, Berlin/Heidelberg 1962, ISBN 978-3-662-11843-6. p. 482
  16. Friedrich Sass: Geschichte des deutschen Verbrennungsmotorenbaus von 1860 bis 1918, Springer, Berlin/Heidelberg 1962, ISBN 978-3-662-11843-6. p. 488
  17. Rudolf Diesel: Die Entstehung des Dieselmotors. Springer, Berlin 1913. ISBN 978-3-642-64940-0, p. 91
  18. Friedrich Sass: Geschichte des deutschen Verbrennungsmotorenbaus von 1860 bis 1918, Springer, Berlin/Heidelberg 1962, ISBN 978-3-662-11843-6. p. 489
  19. Friedrich Sass: Geschichte des deutschen Verbrennungsmotorenbaus von 1860 bis 1918, Springer, Berlin/Heidelberg 1962, ISBN 978-3-662-11843-6. p. 490
  20. Friedrich Sass: Geschichte des deutschen Verbrennungsmotorenbaus von 1860 bis 1918, Springer, Berlin/Heidelberg 1962, ISBN 978-3-662-11843-6. p. 491
  21. Rudolf Diesel: Die Entstehung des Dieselmotors. Springer, Berlin 1913. ISBN 978-3-642-64940-0, p. 59
  22. Rudolf Diesel: Die Entstehung des Dieselmotors. Springer, Berlin 1913. ISBN 978-3-642-64940-0, p. 67
  23. Zinner, Karl; Pucher, Helmut (2012), Aufladung von Verbrennungsmotoren (in German) (4 ed.), Berlin/Heidelberg: Springer, p. 17, ISBN 978-3-642-28989-7
  24. Zinner, Karl; Pucher, Helmut (2012), Aufladung von Verbrennungsmotoren (in German) (4 ed.), Berlin/Heidelberg: Springer, p. 15, ISBN 978-3-642-28989-7
  25. Rudolf Diesel: Die Entstehung des Dieselmotors. Springer, Berlin 1913. ISBN 978-3-642-64940-0, p. 57
  26. Rudolf Diesel: Die Entstehung des Dieselmotors. Springer, Berlin 1913. ISBN 978-3-642-64940-0, p. 60
  27. Rudolf Diesel: Die Entstehung des Dieselmotors. Springer, Berlin 1913. ISBN 978-3-642-64940-0, p. 61
  28. Rudolf Diesel: Die Entstehung des Dieselmotors. Springer, Berlin 1913. ISBN 978-3-642-64940-0, p. 31, Fig. 12
  29. Günter Mau: Handbuch Dieselmotoren im Kraftwerks- und Schiffsbetrieb, Vieweg (Springer), Braunschweig/Wiesbaden 1984, ISBN 978-3-528-14889-8, p. 7
  30. Rudolf Diesel: Die Entstehung des Dieselmotors. Springer, Berlin 1913. ISBN 978-3-642-64940-0, p. 76
  31. Rudolf Diesel: Die Entstehung des Dieselmotors. Springer, Berlin 1913. ISBN 978-3-642-64940-0, p. 87
  32. Rudolf Diesel: Die Entstehung des Dieselmotors. Springer, Berlin 1913. ISBN 978-3-642-64940-0, p. 70
  33. Rudolf Diesel: Die Entstehung des Dieselmotors. Springer, Berlin 1913. ISBN 978-3-642-64940-0, p. 71
  34. Friedrich Sass: Geschichte des deutschen Verbrennungsmotorenbaus von 1860 bis 1918, Springer, Berlin/Heidelberg 1962, ISBN 978-3-662-11843-6. p. 478
  35. Friedrich Sass: Geschichte des deutschen Verbrennungsmotorenbaus von 1860 bis 1918, Springer, Berlin/Heidelberg 1962, ISBN 978-3-662-11843-6. p. 479
  36. Rudolf Diesel: Die Entstehung des Dieselmotors. Springer, Berlin 1913. ISBN 978-3-642-64940-0, p. 73
  37. Rudolf Diesel: Die Entstehung des Dieselmotors. Springer, Berlin 1913. ISBN 978-3-642-64940-0, p. 77
  38. Rudolf Diesel: Die Entstehung des Dieselmotors. Springer, Berlin 1913. ISBN 978-3-642-64940-0, p. 83
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.