Kendrick mass

According to the procedure outlined by Kendrick, the mass of CH₂ is defined as exactly 14 Da, instead of the IUPAC mass of 14.01565 Da.[9][10]

To convert an IUPAC mass of a particular compound to the Kendrick mass, the equation

${\displaystyle {\text{Kendrick mass}}={\text{IUPAC mass}}\times {\frac {14.00000}{14.01565}}}$

is used.[2][11][7][12] The mass in dalton units (Da) can be converted to the Kendrick scale by dividing by 1.0011178.[1][13]

Other groups of atoms in addition to CH₂ can be used define the Kendrick mass, for example CO₂, H₂, H₂O, and O.[12][14][15] In this case, the Kendrick mass for a family of compounds F is given by

${\displaystyle {\text{Kendrick mass (F)}}={\text{(observed mass)}}\times {\frac {\text{nominal mass (F)}}{\text{exact mass (F)}}}}$.

For the hydrocarbon analysis, F=CH₂.

As an example, Kendrick analysis has been used for visualizing families of halogenated compounds of environmental interest that differ only by the number of chlorine, bromine or fluorine substitutions.[4][5]

A recent publication has suggested that Kendrick mass be expressed in Kendrick units with symbol Ke.[16]

The Kendrick mass defect is defined as the exact Kendrick mass subtracted from the nominal (integer) Kendrick mass:[17][18]

${\displaystyle {\text{Kendrick mass defect}}={\text{nominal Kendrick mass}}-{\text{Kendrick mass}}}$

In recent years the equation has changed due to rounding errors to:

${\displaystyle {\text{Kendrick mass defect}}={\text{nominal mass}}-{\text{Kendrick exact mass}}}$

The members of an alkylation series have the same degree of unsaturation and number of heteroatoms (nitrogen, oxygen and sulfur) but differ in the number of CH₂ units. Members of an alkylation series have the same Kendrick mass defect.

The Kendrick mass defect has also been defined as

${\displaystyle {\text{Kendrick mass defect}}=({\text{nominal Kendrick mass}}-{\text{Kendrick mass}})\times 1{,}000}$ .[19]

The abbreviations KM and KMD have been used for Kendrick mass and Kendrick mass defect, respectively.[20]

Plot of Kendrick mass defect as function of Kendrick mass; horizontal lines indicate common repeat units. Each dot in the plot corresponds to a peak measured in a mass spectrum.

In a Kendrick mass analysis, the Kendrick mass defect is plotted as function of nominal Kendrick mass for ions observed in a mass spectrum.[11] Ions of the same family, for example the members of an alkylation series, have the same Kendrick mass defect but different nominal Kendrick mass and are positioned along a horizontal line on the plot. If the composition of one ion in the family can be determined, the composition of the other ions can be inferred. Horizontal lines of different Kendrick mass defect correspond to ions of different composition, for example degree of saturation or heteroatom content.

A Kendrick mass analysis is often used in conjunction with a Van Krevelen diagram, a two- or three- dimensional graphical analysis in which the elemental composition of the compounds are plotted according to the atomic ratios H/C, O/C, or N/C.[12][21]

• Petroleomics