GWR Toad

By HMRI law, every goods train needed a brake van attached at the end of it. This was because most wagons were only fitted with hand brakes, and so the brake van had an important part to play in the safe running of goods trains by adding additional braking capacity. Once trains fitted with vacuum brakes were introduced (from 1904 on the GWR), a guard was required to travel at the rear of every train to ensure that it stayed as one train.[1]

Sand boxes and hand brake on the veranda

The handle for operating the sand boxes

The nickname "Toad" was derived from the GWR's telegraphic code for a brake van, with each bespoke Toad model allocated diagrams in the AA series. The standard GWR brake van design dates from 1894, with many varieties were built between 1894 and the early 1950s.[2] Early vans were just 10 or 12 tons weight, but this gradually increased to 20 tons.[3]

Each Toad had a large guards compartment/cabin extending about two-thirds of the length of the van, with the remaining "veranda" open on three sides, but covered with a roof. Full length external footboards and hand rails allowed the guard or a shunter to ride on the outside during shunting movements. On the veranda, in addition to the screw brake handle, sand boxes were fitted to the rear to allow the guard to sand the rails if necessary, to stop the wheels slipping. A full height door allowed access from the veranda to the cabin, matched by a door on the far end of cabin in most versions. Whilst all versions had side entrances on both sides onto the veranda, some versions included additional full height side doors into the cabin. Inside the cabin were: tool boxes; cupboards; a light and other electrical systems powered by an axle mounted dynamo; a seat; a combined table/desk, often two, with one collapsible; and a stove powered by wood or coal collected from the lineside. Another two sandboxes were also fitted inside the 'closed' end of the van. These were operated by a linkage from the veranda when the van was travelling with the veranda trailing.[3] The guard was first aid trained, and so the cabin contained the train's main first aid kit. Like the roof, the inside of the cabin was painted white for safety reasons, derived from the practice of the time in hospitals. Windows in both ends of the cabin allowed the guard to see out and keep an eye on his train, but actual operations were only possible from the open veranda, which made this a cold and weather-beaten job all year round.[3]

Most Toads carried the name of their home depot on the side. The GWR had a practice of allocating Toads to fixed runs, allowing the allocated guards to build up experience on a particular route, and hence increase safety.[4]

Specialised types included AA8 which had a low, central body to allow forward visibility (for the banking locomotive) on the steeply-graded Pontnewynydd line in south Wales; it had an open veranda at each end. AA7 were small 12 ton vans for working over the Metropolitan Railway’s underground lines to Smithfield Market. AA4 were fully enclosed vans for working through the lengthy Severn Tunnel. Other fully enclosed vans were built for use on permanent way trains and were given diagram AA6. The next batch of permanent way vans were rated at 25 tons and fitted with ploughs to spread newly laid ballast (AA10).[3] Diagram AA23 was the last GWR design of TOAD, and several vans from this lot of 326 never saw GWR service, having been completed under British Railways.[5]

In 1968, the requirement for fully fitted freight trains to end with a guard's van was lifted. From this point onwards, the guard was allowed to ride in the rearmost locomotive cab, giving a good view of the whole train. By this point in time: the Beeching cuts had reduced by two thirds the amount of trackage in the UK; most steam locomotives had been withdrawn; the quantity of wagon-load freight services was in decline; and most British Railways diesel and electric locomotives had cabs at both ends. As a result, although still required for unfitted trains, there was less operational need for so many brake vans, and like many designs the GWR Toads were withdrawn.

A toad brake van that was built in 1877 survived on the Kent & East Sussex Railway as No. 24 until withdrawn and scrapped in 1944. [6]

A sturdy and well built design offering a large enclosed open area, many Toads initially survived into a new life on industrial railways through being deemed "safe" by HM Railway Inspectorate to be used for the transport of workers. It was deemed effectively a small railway carriage.

This generic safety approval was noted and followed initially by many railway preservation societies, who bought Toads to offer ride-on experiences on their developing lines. Hence the number of Toads that survived into preservation versus a number of other pre-grouping designs, and later British railways types, is relatively high.

List of preserved GWR Toad brake vans

No.	Image	Built	Date	Lot No.	Style	First allocation	Last allocation	Current location	Notes
17293		Swindon Works	1943	1383	AA20			Northampton & Lamport Railway
17294		Swindon Works	1943	1383	AA20			Dean Forest Railway
17295		Swindon Works			AA21			South Devon Railway
17391		Swindon Works	1939		AA21			Bristol Harbour Railway
17392		Swindon Works						Gloucestershire Warwickshire Railway
17438								Mid-Norfolk Railway	Private Owner
17908		Swindon Works	1913		AA13	Cardiff		Bluebell Railway[7]
35290		Swindon Works	1948		AA23			Museum of the Great Western Railway
35377		Swindon Works	1948		AA23			Llanelli and Mynydd Mawr Railway
35420		Swindon Works						South Devon Railway
35907		Swindon Works	1944		AA23			Watercress Line	Mostly used for DOWT events.
17293		Swindon Works	1943	1383	AA20			Northampton & Lamport Railway
40362		Swindon Works	1895		AA6	Hereford		Severn Valley Railway	Fully enclosed permanent way derivative
56400		Swindon Works	1900		AA3			Didcot Railway Centre
56769		Swindon Works			AA15			Dean Forest Railway
68500		Swindon Works	1947		AA23			Great Central Railway
68684		Swindon Works	1924		AA15	Hayle		Didcot Railway Centre
68777		Swindon Works	1939		AA20	Newton Abbot		South Devon Railway
68786						Exeter		South Devon Railway
114751		Swindon Works	1934		AA20		Leyton Midland Road, East London	West Somerset Railway	GWR 813 Preservation Fund owned van. Based on The West Somerset Railway
		Swindon Works					Manchester Ship Canal	Gloucester Docks

In The Railway Series children's books by the Reverend W. Awdry and the TV series Thomas & Friends, a brake van character named Toad is based on and named after the GWR Toad.

• Atkins, Beard, Hyde and Tourret (1975). A history of GWR Goods Wagons, Volume1. David and Charles. ISBN 0-7153-6532-0.{{cite book}}: CS1 maint: multiple names: authors list (link)
• Atkins, Beard, Hyde and Tourret (1976). A history of GWR Goods Wagons, Volume2. David and Charles. ISBN 0-7153-7290-4.{{cite book}}: CS1 maint: multiple names: authors list (link)

Notes

1. Atkins, AG; et al. (1975). A history of GWR Goods Wagons. Vol. 1. Newton Abbot: David and Charles. ISBN 0-7153-6532-0.
2. "Toad the GW Brake Van". pegnsean.net. Retrieved 2 October 2011.
3. Atkins, AG et al. (1976) chapter 25
4. Slinn, J N (1978). Great Western Way. Frome: Historical Model Railway Society. ISBN 0-902835-03-3.
5. "GWR AA23 TOAD brake van no.35413". East Somerset Railway. Archived from the original on 25 May 2011. Retrieved 2 October 2011.
6. Stephen Garrett, The Kent & East Sussex Railway, The Oakwood Press, 1999: page 85
7. "Great Western Railway 20 Ton "Toad" Goods Brake Van 17908". Bluebell Railway. Retrieved 2 October 2011.

Wikimedia Commons has media related to Great Western Railway brake vans.