Fractionation of carbon isotopes in oxygenic photosynthesis

Carbon on Earth naturally occurs in two stable isotopes, with 98.9% in the form of ¹²C and 1.1% in ¹³C.[1][8] The ratio between these isotopes varies in biological organisms due to metabolic processes that selectively use one carbon isotope over the other, or "fractionate" carbon through kinetic or thermodynamic effects.[1] Oxygenic photosynthesis takes place in plants and microorganisms through different chemical pathways, so various forms of organic material reflect different ratios of ¹³C isotopes. Understanding these variations in carbon fractionation across species is applied in isotope geochemistry and ecological isotope studies to understand biochemical processes, establish food chains, or model the carbon cycle through geological time.[5]

Carbon isotope fractionations are expressed in using delta notation of δ¹³C ("delta thirteen C"), which is reported in parts per thousand (per mille, ‰).[9] δ¹³C is defined in relation to the Vienna Pee Dee Belemnite (VPDB, ¹³C/¹²C = 0.01118) as an established reference standard.[8][10] This is called a "delta value" and can be calculated from the formula below:

$${\displaystyle \delta ^{13}\mathrm {C} =\left({\frac {\left({\frac {^{13}\mathrm {C} }{^{12}\mathrm {C} }}\right)_{\mathrm {sample} }}{\left({\frac {^{13}\mathrm {C} }{^{12}\mathrm {C} }}\right)_{\mathrm {standard} }}}-1\right)\times 1000}$$

The chemical pathway of oxygenic photosynthesis fixes carbon in two stages: the light-dependent reactions and the light-independent reactions.

The light-dependent reactions capture light energy to transfer electrons from water and convert NADP⁺, ADP, and inorganic phosphate into the energy-storage molecules NADPH and ATP. The overall equation for the light-dependent reactions is generally:[11]

Overview of the Calvin cycle and carbon fixation C3 Pathway

2 H₂O + 2 NADP⁺ + 3 ADP + 3 P_i + light → 2 NADPH + 2 H⁺ + 3 ATP + O₂

The light-independent reactions undergo the Calvin-Benson cycle, in which the energy from NADPH and ATP is used to convert carbon dioxide and water into organic compounds via the enzyme RuBisCO. The overall general equation for the light-independent reactions is the following:[11]

3 CO₂ + 9 ATP + 6 NADPH + 6 H⁺ → C₃H₆O₃-phosphate + 9 ADP + 8 P_i + 6 NADP⁺ + 3 H₂O

The 3-carbon products (C₃H₆O₃-phosphate) of the Calvin cycle are later converted to glucose or other carbohydrates such as starch, sucrose, and cellulose.

Carboxylation of ribulose-1,5-bisphosphate (1) into two molecules of 3-phosphoglycerate (4) by RuBisCO. The intermediate molecule at (3) is 3-keto-2-carboxyarabinitol-1,5-bisphosphate, which decays almost instantaneously into 3-phosphoglycerate.

The large fractionation of ¹³C in photosynthesis is due to the carboxylation reaction, which is carried out by the enzyme ribulose-1,5-bisphosphate carboxylase oxygenase, or RuBisCO.[5] RuBisCO catalyzes the reaction between a five-carbon molecule, ribulose-1,5-bisphosphate (abbreviated as RuBP) and CO₂ to form two molecules of 3-phosphoglyceric acid (abbreviated as PGA). PGA reacts with NADPH to produce 3-phosphoglyceraldehyde.[4]

Isotope fractionation due to Rubisco (form I) carboxylation alone is predicted to be a 28‰ depletion, on average.[12][5] However, fractionation values vary between organisms, ranging from an 11‰ depletion observed in coccolithophorid algae to a 29‰ depletion observed in spinach.[13][14] RuBisCO causes a kinetic isotope effect because ¹²CO₂ and ¹³CO₂ compete for the same active site and ¹³C has an intrinsically lower reaction rate.[15]

In addition to the discriminating effects of enzymatic reactions, the diffusion of CO₂ gas to the carboxylation site within a plant cell also influences isotopic fractionation.[16] Depending on the type of plant (see sections below), external CO₂ must be transported through the boundary layer and stomata and into the internal gas space of a plant cell, where it dissolves and diffuses to the chloroplast.[5] The diffusivity of a gas is inversely proportional to the square root of its molecular reduced mass (relatively to air), causing ¹³CO₂ to be 4.4‰ less diffusive than ¹²CO₂.

A prevailing model for fractionation of atmospheric CO₂ in plants combines the isotope effects of the carboxylation reaction with the isotope effects from gas diffusion into the plant in the following equation:[16]

$${\displaystyle \delta ^{13}C_{\text{sample}}=\delta ^{13}C_{\text{atm}}-a-(b-a)(c_{i}/c_{a})}$$

Where:

• δ¹³C_sample is the delta-value of the organism for ¹³C composition
• δ¹³C_atm is the delta-value of atmospheric CO₂, which is = -7.8‰
• the discrimination due to diffusion a = 4.4‰
• the carboxylation discrimination b = 30‰
• c_a is the partial pressure of CO₂ in the external atmosphere, and
• c_i is the partial pressure of CO₂ in the intercellular spaces.

This model, derived ab initio, generally describes fractionation of carbon in the majority of plants, which facilitate C3 carbon fixation. Modifications have been made to this model with empirical findings.[17] However, several additional factors, not included in this general model, will increase or decrease ¹³C fractionation across species. Such factors include the competing oxygenation reaction of RuBisCO, anatomical and temporal adaptations to enzyme activity, and variations in cell growth and geometry. The isotopic fractionations of different photosynthetic pathways are uniquely characterized by these factors, as described below.

Histograms of the carbon isotope ratios from modern grasses. Note that C3 plants are roughly 14‰ depleted in ¹³C relative to C4 plants.

A C3 plant uses C3 carbon fixation, one of the three metabolic photosynthesis pathways which also include C4 and CAM (described below). These plants are called "C3" due to the three-carbon compound (3-Phosphoglyceric acid, or 3-PGA) produced by the CO₂ fixation mechanism in these plants. This C3 mechanism is the first step of the Calvin-Benson cycle, which converts CO₂ and RuBP into 3-PGA.

C3 plants are the most common type of plant, and typically thrive under moderate sunlight intensity and temperatures, CO₂ concentrations above 200 ppm, and abundant groundwater.[18] C3 plants do not grow well in very hot or arid regions, in which C4 and CAM plants are better adapted.

The isotope fractionations in C3 carbon fixation arise from the combined effects of CO₂ gas diffusion through the stomata of the plant, and the carboxylation via RuBisCO.[1] Stomatal conductance discriminates against the heavier ¹³C by 4.4‰.[1] RuBisCO carboxylation contributes a larger discrimination of 27‰.[1]

RuBisCO enzyme catalyzes the carboxylation of CO₂ and the 5-carbon sugar, RuBP, into 3-phosphoglycerate, a 3-carbon compound through the following reaction:

${\displaystyle CO_{2}+H_{2}O+RuBP{\xrightarrow[{RuBisCO}]{}}2(3{\mbox{-}}{\text{phosphoglycerate}})}$

The product 3-phosphoglycerate is depleted in ¹³C due to the kinetic isotope effect of the above reaction. The overall ¹³C fractionation for C3 photosynthesis ranges between -20 and -37‰.[2]

The wide range of variation in delta values expressed in C3 plants is modulated by the stomatal conductance, or the rate of CO₂ entering, or water vapor exiting, the small pores in the epidermis of a leaf.[1] The δ¹³C of C3 plants depends on the relationship between stomatal conductance and photosynthetic rate, which is a good proxy of water use efficiency in the leaf.[19] C3 plants with high water-use efficiency tend to be less fractionated in ¹³C (i.e., δ¹³C is relatively less negative) compared to C3 plants with low water-use efficiency.[19]

In the C4 pathway, a layer of mesophyll cells encircles bundle sheath cells that have large chloroplasts necessary for the Calvin cycle. A: Mesophyll Cell B: Chloroplast C: Vascular Tissue D: Bundle Sheath Cell E: Stroma F: Vascular Tissue: provides continuous source of water 1) Carbon is fixed to produce oxaloacetate by PEP carboxylase. 2) The four carbon molecule then exits the cell and enters the chloroplasts of bundle sheath cells. 3) It is then broken down releasing carbon dioxide and producing pyruvate. Carbon dioxide combines with ribulose bisphosphate and proceeds to the Calvin Cycle.

C4 plants have developed the C4 carbon fixation pathway to conserve water loss, thus are more prevalent in hot, sunny, and dry climates.[20] These plants differ from C3 plants because CO₂ is initially converted to a four-carbon molecule, malate, which is shuttled to bundle sheath cells, released back as CO₂ and only then enters the Calvin Cycle. In contrast, C3 plants directly perform the Calvin Cycle in mesophyll cells, without making use of a CO₂ concentration method. Malate, the four-carbon compound is the namesake of "C4" photosynthesis. This pathway allows C4 photosynthesis to efficiently shuttle CO₂ to the RuBisCO enzyme and maintain high concentrations of CO₂ within bundle sheath cells. These cells are part of the characteristic kranz leaf anatomy, which spatially separates photosynthetic cell-types in a concentric arrangement to accumulate CO₂ near RuBisCO.[21]

These chemical and anatomical mechanisms improve the ability of RuBisCO to fix carbon, rather than perform its wasteful oxygenase activity. The RuBisCO oxygenase activity, called photorespiration, causes the RuBP substrate to be lost to oxygenation, and consumes energy in doing so. The adaptations of C4 plants provide an advantage over the C3 pathway, which loses efficiency due to photorespiration.[22] The ratio of photorespiration to photosynthesis in a plant varies with environmental conditions, since decreased CO₂ and elevated O₂ concentrations would increase the efficiency of photorespiration.[20] Atmospheric CO₂ on Earth decreased abruptly at a point between 32 and 25 million years ago. This gave a selective advantage to the evolution of the C4 pathway, which can limit photorespiration rate despite the reduced ambient CO₂.[23] Today, C4 plants represent roughly 5% of plant biomass on Earth, but about 23% of terrestrial carbon fixation.[24][25][26] Types of plants which use C4 photosynthesis include grasses and economically important crops, such as maize, sugar cane, millet, and sorghum.[22][27]

Isotopic fractionation differs between C4 carbon fixation and C3, due to the spatial separation in C4 plants of CO₂ capture (in the mesophyll cells) and the Calvin cycle (in the bundle sheath cells). In C4 plants, carbon is converted to bicarbonate, fixed into oxaloacetate via the enzyme phosphoenolpyruvate (PEP) carboxylase, and is then converted to malate.[4] The malate is transported from the mesophyll to bundle sheath cells, which are impermeable to CO₂. The internal CO₂ is concentrated in these cells as malate is reoxidized then decarboxylated back into CO₂ and pyruvate. This enables RuBisCO to perform catalysis while internal CO₂ is sufficiently high to avoid the competing photorespiration reaction. The delta value in the C4 pathway is -12 to -16‰ depleted in ¹³C due to the combined effects of PEP carboxylase and RuBisCO.

The isotopic discrimination in the C4 pathway varies relative to the C3 pathway due to the additional chemical conversion steps and activity of PEP carboxylase. After diffusion into the stomata, the conversion of CO₂ to bicarbonate concentrates the heavier ¹³C. The subsequent fixation via PEP carboxylase is thereby less depleted in ¹³C than that from Rubisco: about 2‰ depleted in PEP carboxylase, versus 29‰ in RuBisCO.[1][5] However, a portion of the isotopically heavy carbon that is fixed by PEP carboxylase leaks out of the bundle sheath cells. This limits the carbon available to RuBisCO, which in turn lowers its fractionation effect.[4] This accounts for the overall delta value in C4 plants to be -12 to -16 ‰.[4]

Plants that use Crassulacean acid metabolism, also known as CAM photosynthesis, temporally separate their chemical reactions between day and night. This strategy modulates stomatal conductance to increase water-use efficiency, so is well-adapted for arid climates.[28] During the night, CAM plants open stomata to allow CO₂ to enter the cell and undergo fixation into organic acids that are stored in vacuoles. This carbon is released to the Calvin cycle during the day, when stomata are closed to prevent water loss, and the light reactions can drive the necessary ATP and NADPH production.[29] This pathway differs from C4 photosynthesis because CAM plants separate carbon by storing fixed CO₂ in vesicles at night, then transporting it for use during the day. Thus, CAM plants temporally concentrate CO₂ to improve RuBisCO efficiency, whereas C4 plants spatially concentrate CO₂ in bundle sheath cells. The distribution of plants which use CAM photosynthesis includes epiphytes (e.g., orchids, bromeliads) and xerophytes (e.g., succulents, cacti).[30]

In Crassulacean acid metabolism, isotopic fractionation combines the effects of the C3 pathway in the daytime and the C4 pathway in the nighttime. At night, when temperature and water loss are lower, the CO₂ diffuses through the stomata and produce malate via phosphenolpyruvate carboxylase.[4][6] During the following day, stomata are closed, malate is decarboxylated, and CO₂ is fixed by RuBisCO. This process alone is similar to that of C4 plants and yields characteristic C4 fractionation values of approximately -11‰.[6] However, in the afternoon, CAM plants may open their stomata and perform C3 photosynthesis.[6] In daytime alone, CAM plants have approximately -28‰ fractionation, characteristic of C3 plants.[6] These combined effects provide δ¹³C values for CAM plants in the range of -10 to -20‰.

The ¹³C to ¹²C ratio in CAM plants can indicate the temporal separation of CO₂ fixation, which is the extent of biomass derived from nocturnal CO₂ fixation relative to diurnal CO₂ fixation.[31] This distinction can be made because PEP carboxylase, the enzyme responsible for net CO₂ uptake at night, discriminates ¹³C less than RuBisCO, which is responsible to daytime CO₂ uptake. CAM plants which fix CO₂ primarily at night would be predicted to show δ¹³C values more similar to C4 plants, whereas daytime CO₂ fixation would show δ¹³C values more similar to C3 plants.

In contrast to terrestrial plants, where CO₂ diffusion in air is relatively fast and typically not limiting, diffusion of dissolved CO₂ in water is considerably slower and can often limit carbon fixation in phytoplankton.[5] As gaseous CO_2(g) is dissolved into aqueous CO_2(aq), it is fractionated by both kinetic and equilibrium effects that are temperature-dependent.[32] Relative to plants, the dissolved CO₂ source for phytoplankton can be enriched in ¹³C by about 8‰ from atmospheric CO₂.[33]

Isotope fractionation of ¹³C by phytoplankton photosynthesis is affected by the diffusion of extracellular aqueous CO₂ into the cell, the RuBisCO-dependent cell growth rate, and the cell geometry and surface area.[7] The use of bicarbonate and carbon-concentrating mechanisms in phytoplankton distinguishes the isotopic fractionation from plant photosynthetic pathways.

The difference between intracellular and extracellular CO₂ concentrations reflects the CO₂ demand of a phytoplankton cell, which is dependent on its growth rate. The ratio of carbon demand to supply governs the diffusion of CO₂ into the cell, and is negatively correlated with the magnitude of the carbon fractionation by phytoplankton.[34] Combined, these relationships allow the fractionation between CO_2(aq) and phytoplankton biomass to be used to estimate the phytoplankton growth rates.[35]

However, growth rate alone does not account for observed fractionation. The flux of CO_2(aq) into and out of a cell is roughly proportional to the cell surface area, and the cell carbon biomass varies as a function of cell volume. Phytoplankton geometry that maximizes surface area to volume should have larger isotopic fractionation from photosynthesis.[36]

The biochemical characteristics of phytoplankton are similar to C3 plants, whereas the gas exchange characteristics more closely resemble the C4 strategy.[37] More specifically, phytoplankton improve the efficiency of their primary carbon-fixing enzyme, RuBisCO, with carbon concentrating mechanisms (CCM), just as C4 plants accumulate CO₂ in the bundle sheath cells. Different forms of CCM in phytoplankton include the active uptake of bicarbonate and CO₂ through the cell membrane, the active transport of inorganic carbon from the cellular membrane to the chloroplasts, and active, unidirectional conversion of CO₂ to bicarbonate.[38] The parameters affecting ¹³C fractionation in phytoplankton contribute to δ¹³C values between -18 and -25‰.[4][7]

• RuBisCO
• Isotope geochemistry
• Intrinsic KIE of RuBisCO
• Paleoclimatology