Detangler

The detangler, Gyro or rotor[1] is an invention for the freestyle BMX bicycle, allowing the handlebars to turn a complete 360° rotation without the brake cables getting tangled up.[2] A detangler is usually only used for the rear brake cable. The front brake cable can be routed through the stem, via a hollow stem bolt known as a Pott's mod bolt,[3] and fork steer tube to avoid the tangling problem.

This article is about a bicycle brake mechanism. For the hair product, see hair conditioner.
A detangler

How it works

The single cable from the handlebar's rear brake lever divides into two cables which are routed to opposite sides of the stem or fork steer tube and into cable stops. The inner cables connect to metal tabs on a disc attached to the upper side of a thrust bearing placed around the stem or steer tube. Squeezing the brake lever pulls the inner cables and causes the bearing assembly to rise. A second disc is attached to the bottom of the thrust bearing such that the entire assembly moves together up and down the steering axis while each disc can rotate independently around the axis. A second set of cables are attached to tabs on this lower disc and pass through cable stops mounted on the either side of the head tube. The two lower cables merge back into one and then are routed to the rear brake. The cables are split in this way to ensure that the detangler mechanism moves equally on both sides.

A simpler, less common variation of the system, termed a "dual cables" brake, does away with the splitters for the upper and lower cables, instead simply running two cables from the brake lever to the detangler and from there to the brake. While this may improve reliability, it may need more maintenance.

Advantages
  • Cables do not get tangled which allows bike tricks such as the tailwhip or barspin to be performed.
  • If a dual-cable setup is used, mechanical friction is reduced.[2]

Disadvantages
  • Harder to set up than a single, continuous cable.
  • More cables to lubricate.
  • Dual cables decreases the flexing, but can give a rigid feel that some people do not like.
  • It is slightly heavier and more expensive than a conventional configuration.

See also

References
  1. Brown, Sheldon. "Sheldon Brown's Bicycle Glossary: Rotor". Sheldon Brown. Retrieved 14 August 2009.
  2. Brown, Sheldon. "Sheldon Brown's Bicycle Glossary: Gyro". Sheldon Brown. Retrieved 14 August 2009.
  3. Brown, Sheldon. "Sheldon Brown's Bicycle Glossary: Potts". Sheldon Brown. Retrieved 14 August 2009.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.