Chevrolet Standard Six

The Chevrolet Standard (Series DC) was launched in 1933, initially as the Chevrolet Standard Mercury, by Chevrolet as a lower priced alternative to the 1932 Chevrolet Series BA Confederate that became the Master Eagle in 1933[3] and Master from 1934.[4] It was advertised as the cheapest six-cylinder enclosed car on the market.[5]

Chevrolet Standard Six
Overview
Manufacturer	Chevrolet (General Motors)
Also called	Chevrolet Mercury (1933 only)
Production	1933 (Mercury) 1934–1936 (Standard)
Assembly	Oakland Assembly, Oakland, California North Tarrytown Assembly, Tarrytown, New York Buffalo Assembly, Buffalo, New York Flint Assembly, Flint, Michigan Norwood Assembly, Norwood, Ohio St. Louis Assembly, St. Louis, Missouri Kansas City Assembly, Kansas City, Missouri Lakewood Assembly, Atlanta, Georgia Janesville Assembly Plant, Janesville, Wisconsin Oshawa Assembly, Oshawa, Ontario Canada Osaka Assembly, Osaka, Japan General Motors South Africa, Port Elizabeth, South Africa GM Argentina, Buenos Aires, Argentina GM Belgium, Antwerp, Belgium
Body and chassis
Body style	2-door coupe 2-door roadster w/rumble seat 2-door sedan 4-door sedan 4-door phaeton
Layout	FR layout
Platform	GM A platform
Related	Chevrolet Master Pontiac Six
Powertrain
Engine	181 cu in (3.0 L) OHV I6 206.8 cu in (3.4 L) OHV I6
Transmission	3-speed manual[1]
Dimensions
Wheelbase	107.0 in (2,718 mm) 109.0 in (2,769 mm)(1936)[2]
Chronology
Predecessor	Chevrolet Series BA Confederate
Successor	Chevrolet Master

The Standard was offered in three body styles all on a 107-inch wheelbase: 2-door sedan (a body style Chevrolet customarily referred to as a "coach" in marketing at the time), coupe and coupe with rumble seat. All bodies were by Fisher and featured 'no-draft ventilation'. All models were powered by a 181 cu in (2,970 cc) six-cylinder valve-in-head engine producing 60 bhp (45 kW; 61 PS) at 3,000 rpm and 125 lb⋅ft (169 N⋅m) of torque[6] giving the car a top speed of between 65–70 mph. This engine had first appeared in Chevrolet's 1929 models, introduced in 1928. The car had full instrumentation.[7] A clock, heater and a radio were options.[1] For 1934, sedan, roadster and touring body styles were added to the catalog.

In 1935, a larger 206.8 cu in (3,389 cc) six-cylinder engine was offered in lieu of the 181 cu in (2,970 cc), producing 74 bhp (55 kW; 75 PS) at 3,200 rpm and 150 lb⋅ft (203 N⋅m) of torque. A sedan delivery was also available this year.

For 1936, the Standard Six received a wide range of improvements and a wider choice of body styles including cabriolet and sports sedan versions. It was built on a new box-girder frame with a wheel base of 109 inches.[8] With an increase of compression ratio from 5.6:1 to 6:1, the standard 206.8 cu in (3,389 cc) engine now produced 79 bhp (59 kW; 80 PS) at 3,200 rpm and 156 lb⋅ft (212 N⋅m) of torque which was now shared with the Master Six.[9] The spare wheel moved from its external rear trunk location to a new compartment under the trunk. Brakes were 11-in drums.[2] The steel roof was new.[10]

The Standard Six was discontinued for 1937 when the Master range was joined by the new Master Deluxe.[11] In May of 1925 the Chevrolet Export Boxing plant at Bloomfield, New Jersey was repurposed from a previous owner where Knock-down kits for Chevrolet, Oakland, Oldsmobile, Buick and Cadillac passenger cars, and both Chevrolet and G. M. C. truck parts are crated and shipped by railroad to the docks at Weehawken, New Jersey for overseas GM assembly factories.[1]